 	 ALCATEL-IND1-UDP-RELAY-MIB DEFINITIONS ::= BEGIN
	 IMPORTS
	 	  RowStatus 			 FROM SNMPv2-TC

		  IpAddress,
		  MODULE-IDENTITY,
		  NOTIFICATION-TYPE,
		  OBJECT-TYPE,
		  OBJECT-IDENTITY,
		  Unsigned32,
		  Integer32,
		  Counter32  FROM SNMPv2-SMI

		  DisplayString,
		  MacAddress,
                  TEXTUAL-CONVENTION     FROM SNMPv2-TC

		  SnmpAdminString FROM SNMP-FRAMEWORK-MIB
		  InetAddressIPv6     FROM INET-ADDRESS-MIB

          VlanBitmap         FROM ALCATEL-IND1-VLAN-STP-MIB

		  MODULE-COMPLIANCE,
		  NOTIFICATION-GROUP,OBJECT-GROUP		FROM SNMPv2-CONF
		  routingIND1UdpRelay, alaDhcpClientTraps  FROM ALCATEL-IND1-BASE
		  InterfaceIndex      FROM IF-MIB;


	     alcatelIND1UDPRelayMIB MODULE-IDENTITY
	 	LAST-UPDATED "201910070000Z"
		ORGANIZATION  "ALE USA Inc"
		CONTACT-INFO
		"Please consult with Customer Service to ensure the most appropriate
		version of this document  is used with the products in question:

			    Alcatel-Lucent Enterprise,
				26801 West Agoura Road
			    Agoura Hills, CA 91301-5122
			      United States Of America

		Telephone:              +1 800 995 2696

		Electronic Mail:	ebg_global_supportcenter@al-enterprise.com
		World Wide Web:	        https://www.al-enterprise.com"
 
	        DESCRIPTION
			      "This module describes an authoritative enterprise-specific Simple
             Network Management Protocol (SNMP) Management Information Base (MIB):

             For the OmniSwitch Product Line
	     UDP Relay to forward BOOTP/DHCP requests across VLANs

	     The right to make changes in specification and other information
             contained in this document without prior notice is reserved.

             No liability shall be assumed for any incidental, indirect, special, or
             consequential damages whatsoever arising from or related to this
             document or the information contained herein.

             Vendors, end-users, and other interested parties are granted
             non-exclusive license to use this specification in connection with
             management of the products for which it is intended to be used.

                         Copyright (C) ALE USA Inc. 2014-2019
			 Copyright (C) 1995-2013 Alcatel-Lucent
                         ALL RIGHTS RESERVED WORLDWIDE"

	     REVISION      "201910070000Z"
	     DESCRIPTION
                  "Updated the latest contact and Copyright information for ALE USA Inc."
		   ::= {routingIND1UdpRelay 1}



        alcatelIND1UDPRelayMIBObjects OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For UDP Relay
            Subsystem Managed Objects."
        ::= { alcatelIND1UDPRelayMIB 1 }


	alcatelIND1UDPRelayMIBConformance OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For UDP Relay
            Subsystem Conformance Information."
        ::= { alcatelIND1UDPRelayMIB 2 }

	alcatelIND1UDPRelayMIBGroups OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For UDP Relay
	     Subsystem Units Of Conformance."
        ::= { alcatelIND1UDPRelayMIBConformance 1 }



	alcatelIND1UDPRelayMIBCompliances OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For UDP Relay
            Subsystem Compliance Statements."
        ::= { alcatelIND1UDPRelayMIBConformance 2 }


   iphelperMIB OBJECT IDENTIFIER ::= { alcatelIND1UDPRelayMIBObjects 1 }




   IphelperServIndex ::= TEXTUAL-CONVENTION
     STATUS current
      DESCRIPTION
      "IphelperServIndex provides a means to specify a service to be forwarded
       by UDP Relay.

       Some values indicate a specfic protocol and associated UDP port(s):
        ----------------             ----------           -----------
	Value                        Protocol             UDP port(s)
        ----------------             ----------           -----------
        iphelperBootp                BOOTP/DHCP           67/68
        iphelperNbnsNbdd             NBNS/NBDD            137/138
        iphelperNbdd                 NBDD                 138
        iphelperDns                  DNS                  53
        iphelperTacacs               TACACS               65
        iphelperTftp                 TFTP                 69
        iphelperNtp                  NTP                  123

       The remaining values are to be used for other services:
        ----------------             ----------           -----------
	Value                        Protocol             UDP port
        ----------------             ----------           -----------
        iphelperOther1                   ?                user-specified
        iphelperOther2                   ?                user-specified
        iphelperOther3                   ?                user-specified
        iphelperOther4                   ?                user-specified
        iphelperOther5                   ?                user-specified
        iphelperOther6                   ?                user-specified
        iphelperOther7                   ?                user-specified
        iphelperOther8                   ?                user-specified
        iphelperOther9                   ?                user-specified
        iphelperOther10                  ?                user-specified
      "
     SYNTAX INTEGER {
        iphelperBootp(1),
        iphelperNbnsNbdd(2),
        iphelperNbdd(3),
        iphelperDns(4),
        iphelperTacacs(5),
        iphelperTftp(6),
        iphelperNtp(7),
        iphelperOther1(8),
        iphelperOther2(9),
        iphelperOther3(10),
        iphelperOther4(11),
        iphelperOther5(12),
        iphelperOther6(13),
        iphelperOther7(14),
        iphelperOther8(15),
        iphelperOther9(16),
        iphelperOther10(17)
     }

       IphelpereOption82ASCIIFieldType ::= TEXTUAL-CONVENTION
       STATUS        current
       DESCRIPTION
            "Ip helper Option 82 Format ASCII field type"
            SYNTAX  INTEGER {
                none(0),
                macAddress(1),
                systemName(2),
                userString(3),
                interfaceAlias(4),
                vlan(5),
                interface(6),
					 cvlan(7),
					 portAlias(8)
            }

   IphelperOption82CircuitOrRemoteId ::= TEXTUAL-CONVENTION
       STATUS        current
       DESCRIPTION
	    "Circuit Id or Remote Id for Option 82 Format ASCII field."
       SYNTAX  INTEGER {
		circuitid(1),
		remoteid(2)
	}

   iphelperTable OBJECT-TYPE
      SYNTAX SEQUENCE OF IphelperEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
      		"A list of active UDP Relay Service instances."
  ::= { iphelperMIB 1 }


  iphelperEntry  OBJECT-TYPE
    SYNTAX	IphelperEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
    		" An entry in UDP Relay table"
    INDEX { iphelperService, iphelperForwAddr ,iphelperVlan }
    ::= { iphelperTable 1 }

    IphelperEntry ::= SEQUENCE {
      iphelperService
      		IphelperServIndex,
      iphelperForwAddr
      		IpAddress,
      iphelperVlan
                Unsigned32,
      iphelperStatus
       RowStatus
   }

   iphelperService  OBJECT-TYPE
   	SYNTAX  IphelperServIndex
	MAX-ACCESS  read-create
	STATUS	current
	DESCRIPTION
		"This specifies a service to be forwarded by UDP Relay."
  ::= { iphelperEntry 1 }

  iphelperForwAddr OBJECT-TYPE
  	SYNTAX IpAddress
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
		"This specifies relayed service's forwarding address.
		For entries with iphelperService equal to iphelperBootp(1):
		  This object can either be set to a distinct IP address (e.g. the address
		  of a server), to an IP broadcast address or a VLAN. A value
		  of 0.0.0.0 indicates that no forwarding address is being used.
                For entries with iphelperService not equal to ipHelperBootp(1),
		  this object is not settable."
  ::= { iphelperEntry 2 }

  iphelperVlan OBJECT-TYPE
        SYNTAX Unsigned32
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
		"This specifies a Vlan to which the service is to be forwarded.
		For entries with iphelperService equal to iphelperBootp(1),
		  a value of 0 indicates that no vlan is being used.
                For entries with iphelperService not equal to ipHelperBootp(1),
		  only non-zero values may be specified."
  ::= { iphelperEntry 3 }

  iphelperStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
            "Row Status for creating/deleting"
  ::= { iphelperEntry 4 }


iphelperStatTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF IphelperStatEntry
	MAX-ACCESS	not-accessible
	STATUS	current
	DESCRIPTION
		"This keeps statistics for each service by server address."
::= { iphelperMIB 2 }

iphelperStatEntry  OBJECT-TYPE
	SYNTAX  IphelperStatEntry
	MAX-ACCESS  not-accessible
	STATUS	current
	DESCRIPTION
		"An entry in the stat table."
  	INDEX {iphelperServerAddress}
::= { iphelperStatTable 1 }


IphelperStatEntry ::= SEQUENCE {
	iphelperServerAddress
                IpAddress,
	iphelperRxFromClient
		Unsigned32,
        iphelperTxToServer
                Unsigned32,
        iphelperMaxHopsViolation
                Unsigned32,
        iphelperForwDelayViolation
                Unsigned32,
        iphelperResetAll
                INTEGER,
        iphelperAgentInfoViolation
                Counter32,
        iphelperInvalidGatewayIP
                Counter32,
        iphelperInvalidAgentInfoOptFrmSrver
                Counter32
		}

iphelperServerAddress  OBJECT-TYPE
        SYNTAX IpAddress
	MAX-ACCESS read-write
	STATUS	current
	DESCRIPTION
               "This specifies the unique server address."
::= { iphelperStatEntry 1 }

iphelperRxFromClient OBJECT-TYPE
	SYNTAX	Unsigned32 (0..65535)
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"This keeps track of the number of packets recieved from the client."
::= { iphelperStatEntry 2 }


iphelperTxToServer  OBJECT-TYPE
	SYNTAX	Unsigned32 (0..65535)
	MAX-ACCESS	read-write
	STATUS current
	DESCRIPTION
              " This keeps track of the number of packets transmitted  to the server."
::= { iphelperStatEntry  3}


iphelperMaxHopsViolation  OBJECT-TYPE
	SYNTAX	Unsigned32 (0..65535)
	MAX-ACCESS	read-write
	STATUS current
	DESCRIPTION
              " This keeps track of the number of packets dropped due to max hops violation.
		Only meaningful for entries with ipHelperService equal to iphelperBootp(1)."
::= { iphelperStatEntry  4}

iphelperForwDelayViolation  OBJECT-TYPE
	SYNTAX	Unsigned32 (0..65535)
	MAX-ACCESS	read-write
	STATUS current
	DESCRIPTION
              "This keeps track of the number of packets dropped due to forward delay violation.
		Only meaningful for entries with ipHelperService equal to iphelperBootp(1)."
::= { iphelperStatEntry  5}

iphelperResetAll  OBJECT-TYPE
	SYNTAX	INTEGER (0..1)
	MAX-ACCESS	read-write
	STATUS current
	DESCRIPTION
            "This parameter resets all the stats."
::= { iphelperStatEntry 6}

iphelperAgentInfoViolation  OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS current
	DESCRIPTION
              "This keeps track of the number of packets dropped due to DHCP packet with giaddr
		field not equal to zero and Relay Agent Information option is present and also the
		Relay Agent Information Policy is set to DROP."
::= { iphelperStatEntry  7}

iphelperInvalidGatewayIP  OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS current
	DESCRIPTION
              "This keeps track of the number of packets dropped due to giaddr matching a local
		subnet and Relay Agent Information option is present in the DHCP packet."
::= { iphelperStatEntry  8}

iphelperInvalidAgentInfoOptFrmSrver  OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS current
	DESCRIPTION
              "This keeps track of the number of packets dropped due to invalid from DHCP server
		with Relay Agent Information option in the DHCP packet."
::= { iphelperStatEntry  9}

iphelperForwDelay  OBJECT-TYPE
  	SYNTAX Unsigned32 (0..65535)
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"This sets the BOOTP/DHCP relay's forwarding delay and
		is only used by the BOOTP/DHCP service. For other services
		it is ignored.It is typically set as seconds, but the value is totally
		client dependent.This relay will not forward frames until client
		frames have 'secs' field set to atleast the value
		iphelperForwDelay."
::= { iphelperMIB 3 }

iphelperMaxHops OBJECT-TYPE
	SYNTAX Unsigned32 (1..16)
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"This sets the BOOTP/DHCP relay's maximum hops
		forwarding limit and is only used by the BOOTP/DHCP service. For
		other services it is ignored. If a frame arrives with hopcount greater than
	or equal to iphelperMaxHops, it will be dropped."
::= {iphelperMIB  4}

iphelperForwardOption OBJECT-TYPE
	SYNTAX INTEGER
		{
		  standard(1),
		  avlanOnly(2),
                  perVlanOnly(3)
		}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"This is only significant for the BOOTP/DHCP service. It allows the relay
		to forward DHCP requests only when they are issued by an Authenticated Vlan
		client.Needed to prevent having multiple relays enabled on the same vlan.
		Default value is standard"
::= {iphelperMIB  5}


iphelperBootupOption OBJECT-TYPE
	SYNTAX INTEGER
		{
		  enable(1),
		  disable(2)
		}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"This is only significant for the BOOTP/DHCP service.  It allows the user to
		enable or disable the functionality of the relay to get an IP address at the
		time of system boot-up and assign that IP address as the router IP of the
		default VLAN. Default option is Disable."
::= {iphelperMIB 6}


iphelperBootupPacketOption OBJECT-TYPE
	SYNTAX INTEGER
		{
		  bootp(1),
		  dhcp(2)
		}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"This is only significant for the BOOTP/DHCP service.  It allows the user to
		select the packet format with the choices of BOOTP and DHCP to be used to get
		an IP address at the time of system boot-up.
                 Default option is DHCP"
::= {iphelperMIB 7}



   iphelperxServicePortAssociationTable OBJECT-TYPE
      SYNTAX SEQUENCE OF IphelperxServicePortAssociationEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
      		"A list of services being forwarded with their associated ports.
                 An entry in this table is allowed only for the services listed below:
                     iphelperBootp
                     iphelperNbnsNbdd
                     iphelperNbdd
                     iphelperDns
                     iphelperTacacs
                     iphelperTftp
                     iphelperNtp
                 "

  ::= { iphelperMIB 8 }


  iphelperxServicePortAssociationEntry  OBJECT-TYPE
    SYNTAX	IphelperxServicePortAssociationEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
    		" An entry in UDP Relay PortAssociation table"
    INDEX { iphelperxServicePortAssociationService }
    ::= { iphelperxServicePortAssociationTable 1 }

    IphelperxServicePortAssociationEntry ::= SEQUENCE {
      iphelperxServicePortAssociationService
      		IphelperServIndex,
      iphelperxServicePortAssociationPort
                Unsigned32,
      iphelperxServicePortAssociationName
	        DisplayString,
      iphelperxServicePortAssociationStatus
       RowStatus
   }

   iphelperxServicePortAssociationService  OBJECT-TYPE
   	SYNTAX  IphelperServIndex
	MAX-ACCESS  read-write
	STATUS	current
	DESCRIPTION
		"This specifies the service being forwarded.
		 Legal values:
                     iphelperBootp(1)
                     iphelperNbnsNbdd(2)
                     iphelperNbdd(3)
                     iphelperDns(4)
                     iphelperTacacs(5)
                     iphelperTftp(6)
                     iphelperNtp(7)
                "

  ::= { iphelperxServicePortAssociationEntry 1 }

  iphelperxServicePortAssociationPort OBJECT-TYPE
        SYNTAX Unsigned32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
                "UDP port for the service."
  ::= { iphelperxServicePortAssociationEntry 2 }

  iphelperxServicePortAssociationName OBJECT-TYPE
	SYNTAX	DisplayString (SIZE (0..30))
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
            "The name and/or description of the service."
  ::= { iphelperxServicePortAssociationEntry 3 }

  iphelperxServicePortAssociationStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
            "Row Status for creating/deleting"
  ::= { iphelperxServicePortAssociationEntry 4 }


   iphelperxPortServiceAssociationTable OBJECT-TYPE
      SYNTAX SEQUENCE OF IphelperxPortServiceAssociationEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
      		"A list of services being forwarded with their associated ports.
                 An entry in this table is allowed only for those services
		 NOT using one of the following well-known ports:
                    53  - DNS
                    65  - TACACS
		    67  - BOOTP/DHCP
		    68  - BOOTP/DHCP
                    69  - TFTP
                    123 - NTP
		    137 - NBNS
		    138 - NBDD
                 "

  ::= { iphelperMIB 9 }


  iphelperxPortServiceAssociationEntry  OBJECT-TYPE
    SYNTAX	IphelperxPortServiceAssociationEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
    		" An entry in UDP Relay PortAssociation table"
    INDEX { iphelperxPortServiceAssociationPort }
    ::= { iphelperxPortServiceAssociationTable 1 }

    IphelperxPortServiceAssociationEntry ::= SEQUENCE {
      iphelperxPortServiceAssociationService
      		IphelperServIndex,
      iphelperxPortServiceAssociationPort
                Unsigned32,
      iphelperxPortServiceAssociationName
	        DisplayString,
      iphelperxPortServiceAssociationStatus
       RowStatus
   }

   iphelperxPortServiceAssociationService  OBJECT-TYPE
   	SYNTAX  IphelperServIndex
	MAX-ACCESS  read-only
	STATUS	current
	DESCRIPTION
		"This specifies the service being forwarded."

  ::= { iphelperxPortServiceAssociationEntry 1 }

  iphelperxPortServiceAssociationPort OBJECT-TYPE
        SYNTAX Unsigned32
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
                "UDP port for the service.
		 May not be one of the following well-known ports:
                    53  - DNS
                    65  - TACACS
		    67  - BOOTP/DHCP
		    68  - BOOTP/DHCP
                    69  - TFTP
                    123 - NTP
		    137 - NBNS
		    138 - NBDD
                 "
  ::= { iphelperxPortServiceAssociationEntry 2 }

  iphelperxPortServiceAssociationName OBJECT-TYPE
	SYNTAX	DisplayString (SIZE (0..30))
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
            "The name and/or description of the service."
  ::= { iphelperxPortServiceAssociationEntry 3 }

  iphelperxPortServiceAssociationStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
            "Row Status for creating/deleting"
  ::= { iphelperxPortServiceAssociationEntry 4 }


   iphelperxPropertiesTable OBJECT-TYPE
      SYNTAX SEQUENCE OF IphelperPropertiesEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
      		"A list of services being forwarded with their associated ports.
		 There is an entry in this table for each service being forwarded
		 by UDP Relay, including those with implied protocol/port associations."
  ::= { iphelperMIB 10 }


  iphelperxPropertiesEntry  OBJECT-TYPE
    SYNTAX	IphelperPropertiesEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
    		" An entry in UDP Relay Service Properties table"
    INDEX { iphelperxPropertiesService }
    ::= { iphelperxPropertiesTable 1 }

    IphelperPropertiesEntry ::= SEQUENCE {
      iphelperxPropertiesService
      		IphelperServIndex,
      iphelperxPropertiesPort
                Unsigned32,
      iphelperxPropertiesName
	        DisplayString
   }

   iphelperxPropertiesService  OBJECT-TYPE
   	SYNTAX  IphelperServIndex
	MAX-ACCESS  read-only
	STATUS	current
	DESCRIPTION
		"This specifies the service to be  forwarded."
  ::= { iphelperxPropertiesEntry 1 }

  iphelperxPropertiesPort OBJECT-TYPE
        SYNTAX Unsigned32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
                "UDP port for the service."
  ::= { iphelperxPropertiesEntry 2 }

  iphelperxPropertiesName OBJECT-TYPE
	SYNTAX	DisplayString (SIZE (0..30))
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
            "The name/description of the service."
  ::= { iphelperxPropertiesEntry 3 }


  iphelperxStatTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF IphelperxStatEntry
	MAX-ACCESS	not-accessible
	STATUS	current
	DESCRIPTION
		"This keeps statistics for each service by server address."
  ::= { iphelperMIB 11 }

  iphelperxStatEntry  OBJECT-TYPE
	SYNTAX  IphelperxStatEntry
	MAX-ACCESS  not-accessible
	STATUS	current
	DESCRIPTION
		"An entry in the stat table."
  	INDEX {iphelperxStatService, iphelperxStatServerAddress}
  ::= { iphelperxStatTable 1 }


  IphelperxStatEntry ::= SEQUENCE {
        iphelperxStatService
      		IphelperServIndex,
	iphelperxStatServerAddress
                IpAddress,
	iphelperxStatVlan
                Unsigned32,
	iphelperxStatRxFromClient
		Unsigned32,
        iphelperxStatTxToServer
                Unsigned32,
        iphelperxStatReset
                INTEGER
		}

  iphelperxStatService OBJECT-TYPE
   	SYNTAX  IphelperServIndex
	MAX-ACCESS  read-only
	STATUS	current
	DESCRIPTION
		"This specifies the service being forwarded."
  ::= { iphelperxStatEntry 1 }

  iphelperxStatServerAddress  OBJECT-TYPE
        SYNTAX IpAddress
	MAX-ACCESS read-write
	STATUS	current
	DESCRIPTION
               "This specifies the unique server address."
  ::= { iphelperxStatEntry 2 }

  iphelperxStatVlan  OBJECT-TYPE
        SYNTAX Unsigned32
	MAX-ACCESS read-only
	STATUS	current
	DESCRIPTION
               "This specifies the unique Vlan of the server."
  ::= { iphelperxStatEntry 3 }

  iphelperxStatRxFromClient OBJECT-TYPE
	SYNTAX	Unsigned32 (0..65535)
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"This keeps track of the number of packets recieved from the client."
  ::= { iphelperxStatEntry 4 }


  iphelperxStatTxToServer  OBJECT-TYPE
	SYNTAX	Unsigned32 (0..65535)
	MAX-ACCESS	read-only
	STATUS current
	DESCRIPTION
              " This keeps track of the number of packets transmitted  to the server."
  ::= { iphelperxStatEntry  5}


  iphelperxStatReset  OBJECT-TYPE
	SYNTAX	INTEGER (0..1)
	MAX-ACCESS	read-write
	STATUS current
	DESCRIPTION
            "This parameter resets all the stats for this entry."
  ::= { iphelperxStatEntry 6}

iphelperAgentInformation OBJECT-TYPE
        SYNTAX INTEGER
                {
                  enable(1),
                  disable(2)
                }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
                "This is only significant for the BOOTP/DHCP service.  It allows the user to
                enable or disable the functionality of inserting the relay agent information
                option to the DHCP option field according to RFC 3046."
::= {iphelperMIB 12}


iphelperAgentInformationPolicy OBJECT-TYPE
        SYNTAX INTEGER
                {
                  drop(1),
                  keep(2),
                  replace(3)
                }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
                "This is only significant for the BOOTP/DHCP service.  It allows the user to
                select the policy of either drop, keep or replace the relay agent information
                option if it is already present in the DHCP packet."
::= {iphelperMIB 13}


    iphelperDhcpSnoopingVlanTable OBJECT-TYPE
	SYNTAX SEQUENCE OF IphelperDhcpSnoopingVlanEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
      		"A list of vlans that have DHCP Snooping enabled."
    ::= { iphelperMIB 14 }


    iphelperDhcpSnoopingVlanEntry  OBJECT-TYPE
	SYNTAX  IphelperDhcpSnoopingVlanEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"A DHCP Snooping VLAN entry."
	INDEX { iphelperDhcpSnoopingVlanNumber }
    ::= { iphelperDhcpSnoopingVlanTable 1 }


    IphelperDhcpSnoopingVlanEntry ::= SEQUENCE {
	iphelperDhcpSnoopingVlanNumber
		INTEGER,
	iphelperDhcpSnoopingVlanOpt82DataInsertionStatus
		INTEGER,
	iphelperDhcpSnoopingVlanMacAddrVerificationStatus
		INTEGER,
	iphelperDhcpSnoopingVlanTrafficSuppressionStatus
		INTEGER,
        iphelperDhcpSnoopingVlanStatus
		RowStatus
	}

    iphelperDhcpSnoopingVlanNumber  OBJECT-TYPE
	    SYNTAX  INTEGER (1..4094)
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		 "The VLAN number identifying this instance. Valid
		  range from 1 to 4094."
    ::= { iphelperDhcpSnoopingVlanEntry 1 }

    iphelperDhcpSnoopingVlanOpt82DataInsertionStatus OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	enabled(1),
	    	disabled(2)
	    }
	    MAX-ACCESS  read-create
	    STATUS  current
	    DESCRIPTION
		"The DHCP Option-82 data insertion status. Default value
	  	 is enabled, which means once the VLAN is enabled for DHCP
		 snooping, the Option-82 field will be inserted in the DHCP
	  	 packets between the Relay Agent and the DHCP Server, on all
		 the ports belong to the VLAN."
		 DEFVAL { enabled }
    ::= { iphelperDhcpSnoopingVlanEntry 2 }

    iphelperDhcpSnoopingVlanMacAddrVerificationStatus OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	enabled(1),
	    	disabled(2)
	    }
	    MAX-ACCESS  read-create
	    STATUS  current
	    DESCRIPTION
		"The DHCP Snooping MAC Address verification status. Default value
	  	 is enabled. Once enabled, for all the incoming DHCP traffic to
  		 those DHCP Snooping enabled vlan port, it compares the source MAC
		 address and the client Hardware Address in the DHCP packet. If mismatch,
		 the packet will be dropped."
		 DEFVAL { enabled }
    ::= { iphelperDhcpSnoopingVlanEntry 3 }


    iphelperDhcpSnoopingVlanTrafficSuppressionStatus OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	enabled(1),
	    	disabled(2)
	    }
	    MAX-ACCESS  read-create
	    STATUS  current
	    DESCRIPTION
		"The DHCP Snooping Traffic Suppression status. Default value
	  	 is disabled. Once enabled, for all the incoming DHCP traffic to
  		 those DHCP Snooping enabled vlan port will not be flooded throughout
		 the VLAN. The usage of UDP/DHCP Relay Agent will be enforced. Traffic
		 will always be forwarded to CPU."
		 DEFVAL { disabled }
    ::= { iphelperDhcpSnoopingVlanEntry 4 }

    iphelperDhcpSnoopingVlanStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
            "Row Status for creating/deleting"
    ::= { iphelperDhcpSnoopingVlanEntry 5 }


    iphelperDhcpSnoopingPortTable OBJECT-TYPE
	SYNTAX SEQUENCE OF IphelperDhcpSnoopingPortEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
      		"A list of ports that have DHCP Snooping trust status."
    ::= { iphelperMIB 15 }


    iphelperDhcpSnoopingPortEntry  OBJECT-TYPE
	SYNTAX  IphelperDhcpSnoopingPortEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"A DHCP Snooping Port entry."
	INDEX { iphelperDhcpSnoopingPortIfIndex }
    ::= { iphelperDhcpSnoopingPortTable 1 }


    IphelperDhcpSnoopingPortEntry ::= SEQUENCE {
	iphelperDhcpSnoopingPortIfIndex
		InterfaceIndex,
	iphelperDhcpSnoopingPortTrustMode
		INTEGER,
	iphelperDhcpSnoopingPortTrafficSuppression
		INTEGER,
	iphelperDhcpSnoopingPortMacAddrViolation
		Counter32,
	iphelperDhcpSnoopingPortDhcpServerViolation
		Counter32,
	iphelperDhcpSnoopingPortOption82Violation
		Counter32,
	iphelperDhcpSnoopingPortRelayAgentViolation
		Counter32,
	iphelperDhcpSnoopingPortBindingViolation
		Counter32,
	iphelperDhcpSnoopingPortIpSourceFiltering
		INTEGER
	}

    iphelperDhcpSnoopingPortIfIndex  OBJECT-TYPE
	    SYNTAX  InterfaceIndex
	    MAX-ACCESS  read-only
	    STATUS  current
	    DESCRIPTION
		 "The ifIndex subindex identifying this instance."
    ::= { iphelperDhcpSnoopingPortEntry 1 }

    iphelperDhcpSnoopingPortTrustMode OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	blocked(1),
		clientOnly(2),
	    	trusted(3)
	    }
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"The DHCP Snooping's VLAN port's trust mode. Default value
	  	 is client-only, which means once the VLAN is enabled for DHCP
		 snooping, the vlan ports only allow DHCP client packets. Blocked
		 means all DHCP traffic is block on the port. Trusted means all
		 DHCP traffic is allowed on the port"
		 DEFVAL { clientOnly }
    ::= { iphelperDhcpSnoopingPortEntry 2 }

    iphelperDhcpSnoopingPortTrafficSuppression OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	enabled(1),
	    	disabled(2)
	    }
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"The DHCP Snooping Traffic Suppression status. Default value
	  	 is disabled. Once enabled, for all the incoming DHCP traffic to
  		 those ports will not be flooded instead will always be forwarded to CPU."
		 DEFVAL { disabled }
    ::= { iphelperDhcpSnoopingPortEntry 3 }

    iphelperDhcpSnoopingPortMacAddrViolation  OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS current
	DESCRIPTION
              "This keeps track of the number of packets dropped due to DHCP
	       packet with the source MAC Address not equal the client DHCP
	       Hardware address in the DHCP packet."
    ::= { iphelperDhcpSnoopingPortEntry 4 }

    iphelperDhcpSnoopingPortDhcpServerViolation  OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS current
	DESCRIPTION
              "This keeps track of the number of packets dropped due to receiving
	       an DHCP server packet on a DHCP Snooping enabled port."
    ::= { iphelperDhcpSnoopingPortEntry 5 }

    iphelperDhcpSnoopingPortOption82Violation  OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS current
	DESCRIPTION
              "This keeps track of the number of packets dropped due to a relay
	       agent forards a packet that includes option 82 info to an untrusted port."
    ::= { iphelperDhcpSnoopingPortEntry 6 }

    iphelperDhcpSnoopingPortRelayAgentViolation  OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS current
	DESCRIPTION
              "This keeps track of the number of packets dropped due to an DHCP
	       relay agent forwards a DHCP packate includes an relay agent ip address that
 	       is not 0.0.0.0."
    ::= { iphelperDhcpSnoopingPortEntry 7 }

    iphelperDhcpSnoopingPortBindingViolation  OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS current
	DESCRIPTION
              "This keeps track of the number of packets dropped due to receiving
	       an DHCP Relase or DHCP Decline message that contains a MAC address in the
	       DHCP snooping binding table, but the interface information in the binding
	       table does not match the interface on which the message was received."
    ::= { iphelperDhcpSnoopingPortEntry 8 }

    iphelperDhcpSnoopingPortIpSourceFiltering OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	enabled(1),
	    	disabled(2)
	    }
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"The DHCP Snooping IP Source filtering  status. Default value
	  	 is disabled. Once enabled, only the incoming traffic with the proper
  		 client IP address, MAC address and port will be allowed."
		 DEFVAL { disabled }
    ::= { iphelperDhcpSnoopingPortEntry 9 }


    iphelperDhcpSnoopingBindingTable OBJECT-TYPE
	SYNTAX SEQUENCE OF IphelperDhcpSnoopingBindingEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
      		"DHCP Snooping binding table."
    ::= { iphelperMIB 16 }


    iphelperDhcpSnoopingBindingEntry  OBJECT-TYPE
	SYNTAX  IphelperDhcpSnoopingBindingEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"A DHCP Snooping binding entry."
	INDEX { iphelperDhcpSnoopingBindingMacAddress, iphelperDhcpSnoopingBindingIfIndex }
    ::= { iphelperDhcpSnoopingBindingTable 1 }


    IphelperDhcpSnoopingBindingEntry ::= SEQUENCE {
	iphelperDhcpSnoopingBindingMacAddress
		MacAddress,
	iphelperDhcpSnoopingBindingIfIndex
		InterfaceIndex,
	iphelperDhcpSnoopingBindingIpAddress
		IpAddress,
	iphelperDhcpSnoopingBindingVlan
		Unsigned32,
	iphelperDhcpSnoopingBindingLeaseTime
		Unsigned32,
	iphelperDhcpSnoopingBindingType
		INTEGER,
        iphelperDhcpSnoopingBindingRowStatus
		RowStatus,
	iphelperDhcpSnoopingBindingRemoteFlag
		INTEGER
	}

    iphelperDhcpSnoopingBindingMacAddress  OBJECT-TYPE
	    SYNTAX  MacAddress
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		 "The MAC Address subindex identifying this instance."
    ::= { iphelperDhcpSnoopingBindingEntry 1 }

    iphelperDhcpSnoopingBindingIfIndex OBJECT-TYPE
	    SYNTAX  InterfaceIndex
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"The IfIndex subindex identifying this instance. It is the
	 	 the interface where the DHCP request is coming in from."
    ::= { iphelperDhcpSnoopingBindingEntry 2 }


    iphelperDhcpSnoopingBindingIpAddress  OBJECT-TYPE
	SYNTAX	IpAddress
	MAX-ACCESS	read-create
	STATUS current
	DESCRIPTION
              "The Ip Address offered by the DHCP Server to the Client."
    ::= { iphelperDhcpSnoopingBindingEntry 3 }


    iphelperDhcpSnoopingBindingVlan OBJECT-TYPE
	    SYNTAX  Unsigned32
	    MAX-ACCESS  read-create
	    STATUS  current
	    DESCRIPTION
		"It is the VLAN Id where the DHCP client belongs to."
    ::= { iphelperDhcpSnoopingBindingEntry 4 }


    iphelperDhcpSnoopingBindingLeaseTime  OBJECT-TYPE
	SYNTAX	Unsigned32
	MAX-ACCESS	read-only
	STATUS current
	DESCRIPTION
              "The lease time of the client's IP Address in minutes."
    ::= { iphelperDhcpSnoopingBindingEntry 5 }

    iphelperDhcpSnoopingBindingType  OBJECT-TYPE
	SYNTAX  INTEGER {
	  dynamic(1),
	  static(2)
	}
	MAX-ACCESS	read-create
	STATUS current
	DESCRIPTION
              "The learning/configuration nature of the binding entry.
	       Normally, the entries are learned dynamically, while it
	       also can be statically/manually configured."
	DEFVAL { dynamic }
    ::= { iphelperDhcpSnoopingBindingEntry 6 }


    iphelperDhcpSnoopingBindingRowStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
            "Row Status for creating/deleting"
    ::= { iphelperDhcpSnoopingBindingEntry 7 }

    iphelperDhcpSnoopingBindingRemoteFlag  OBJECT-TYPE
        SYNTAX  INTEGER {
           remote(1),
           local(2)
         }
         MAX-ACCESS      read-only
         STATUS current
         DESCRIPTION
               "Flag to indicate whether the binding entry belong to local
               chassis or remote chassis in multi-chassis environment."
         DEFVAL { local }
     ::= { iphelperDhcpSnoopingBindingEntry 8 }


    iphelperDhcpSnooping OBJECT-TYPE
            SYNTAX INTEGER
                {
                  switchLevel(1),
                  disabled(2),
		  vlanLevel(3)
                }
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION
                    "Enabling DHCP Snooping at the switch level. For the vlan level,
		     it is enabled implicitly when an individual vlan's DHCP Snooping
		     is enbled."
    ::= {iphelperMIB 17}


    iphelperDhcpSnoopingOpt82DataInsertionStatus OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	enabled(1),
	    	disabled(2)
	    }
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"The DHCP Option-82 data insertion status at switch level.
		 Default value is enabled, the Option-82 field will be inserted in the DHCP
	  	 packets between the Relay Agent and the DHCP Server, on all
		 the ports belong to the switch."
		 DEFVAL { enabled }
    ::= { iphelperMIB 18 }

    iphelperDhcpSnoopingMacAddrVerificationStatus OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	enabled(1),
	    	disabled(2)
	    }
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"The DHCP Snooping MAC Address verification status at switch level.
		 Default value is enabled. Once enabled, for all the incoming DHCP traffic to
  		 the port, it compares the source MAC address and the client Hardware
		 Address in the DHCP packet. If mismatch, the packet will be dropped."
		 DEFVAL { enabled }
     ::= { iphelperMIB 19 }


     iphelperDhcpSnoopingTrafficSuppressionStatus OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	enabled(1),
	    	disabled(2)
	    }
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"The DHCP Snooping Traffic Suppression status at switch level. Default value
	  	 is disabled. Once enabled, for all the incoming DHCP traffic to
  		 the ports will not be flooded  The usage of UDP/DHCP Relay Agent will be
		 enforced. DHCP Traffic will always be forwarded to CPU."
		 DEFVAL { disabled }
    ::= { iphelperMIB 20 }


    iphelperDhcpSnoopingBindingStatus OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	enabled(1),
	    	disabled(2)
	    }
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"This object specifies if the capability of building the DHCP Snooping
		 Binding Table/Database is enable or not. By default, it is enabled.
		 It is applicable for both switch-level or vlan-level DHCP Snooping."
	    DEFVAL { enabled }
     ::= { iphelperMIB 21 }

    iphelperDhcpSnoopingBindingDatabaseSyncTimeout OBJECT-TYPE
	    SYNTAX	Unsigned32 (180..600)
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"The DHCP Snooping Binding Database synchronization timeout value. It is
		 used to specify the synchronization frequency, in seconds, between the
		 binding table in memory and the binding file in flash."
	    DEFVAL { 300 }
     ::= { iphelperMIB 22 }

    iphelperDhcpSnoopingBindingDatabaseLastSyncTime OBJECT-TYPE
	    SYNTAX	DisplayString
	    MAX-ACCESS  read-only
	    STATUS  current
	    DESCRIPTION
		"The time stamp of the last successuful DHCP Snooping Binding
		 Database synchronization."
     ::= { iphelperMIB 23 }

    iphelperDhcpSnoopingBindingDatabaseAction OBJECT-TYPE
	SYNTAX INTEGER {
		noaction(0),
		purge(1),
		renew(2)
	}
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION
		"This object identifies the action to be performed. Purge:
		 means to clear the binding table entries in the memory.
		 Renew: means to populate the binding table entries from the
		 flash file."
     ::= { iphelperMIB 24 }


    iphelperTrafficSuppressionStatus OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	enabled(1),
	    	disabled(2)
	    }
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"DHCP packet traffic suppression status. By default, it is disabled.
		 Once enabled, all incoming DHCP packets will be sent to software only,
		 and no longer be hardware flooded."
	    DEFVAL { disabled }
     ::= { iphelperMIB 25 }
    
    iphelperDhcpSnoopingBypassOpt82CheckStatus OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	enabled(1),
	    	disabled(2)
	    }
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"DHCP bypass option-82 check status. By default, it is disabled.
		 Once enabled, it will no longer enforce the check of option-82
		 field in the incoming DHCP Packets on those untrusted ports."
	    DEFVAL { disabled }
     ::= { iphelperMIB 26 }
    
    iphelperDhcpOption82FormatType OBJECT-TYPE
SYNTAX  INTEGER {
		macAddress(1),
		systemName(2),
		userString(3),
		interfaceAlias(4),
		autoInterfaceAlias(5),
		ascii(6),
	   portAlias(7)
}
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"DHCP option-82 defines the type of information carried in circuit id 
		 and remote id sub option fields. If the type selected is string the actual
		 value of the string can be found in iphelperDhcpOption82StringValue.
		 Format type ASCII will insert the configured fields in ASCII format."
	    DEFVAL { macAddress }
     ::= { iphelperMIB 27 }

    iphelperDhcpOption82StringValue OBJECT-TYPE
	    SYNTAX	DisplayString (SIZE (0..63))
	    MAX-ACCESS read-write
	    STATUS current
	    DESCRIPTION
		"The value of the string that will be used in the circuit id and remote id
		 sub options."
     ::= { iphelperMIB 28 }

    iphelperPXESupport OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	enabled(1),
	    	disabled(2)
	    }
	    MAX-ACCESS read-write
	    STATUS current
	    DESCRIPTION
		"When enabled the relay agent will replace the source IP address of the packet 
                 with the gateway IP address from the DHCP packet.
                 The default value is disabled."
	    DEFVAL { disabled }
     ::= { iphelperMIB 29 }

    iphelperDhcpSnoopingBindingPersistencyStatus OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	enabled(1),
	    	disabled(2)
	    }
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"DHCP Snooping binding table persistency check status. By default, it is disabled.
		 Once enabled, the binding entries expiry will be solely depend on Lease time"
	    DEFVAL { disabled }
     ::= { iphelperMIB 30 }


    iphelperDhcpSnoopingOption82FormatASCIIField1 OBJECT-TYPE
            SYNTAX IphelpereOption82ASCIIFieldType
            MAX-ACCESS  read-write
            STATUS  deprecated
            DESCRIPTION
                "The type of the first field in the Option 82 string in ASCII format,
                 which will be copied to Option-82 circuit id of the DHCP packet.
		 This Field is applicable only, if the option 82 format type is ASCII. This
		 object is deprecated by the objects in iphelperDhcpSnoopingOption82FormatASCIIConfigurableTable."
            DEFVAL { none }
     ::= { iphelperMIB 31 }

    iphelperDhcpSnoopingOption82FormatASCIIField1StringValue OBJECT-TYPE
            SYNTAX      DisplayString (SIZE (0..63))
            MAX-ACCESS read-write
            STATUS deprecated
            DESCRIPTION
                "The string value of the first field in the Option 82 string in ASCII 
                 format, which will be copied to Option-82 circuit id of the DHCP packet.
                 This Field is applicable only, if the option 82 format type is ASCII. This
                 object is deprecated by the objects in iphelperDhcpSnoopingOption82FormatASCIIConfigurableTable."
     ::= { iphelperMIB 32 }

    iphelperDhcpSnoopingOption82FormatASCIIField2 OBJECT-TYPE
            SYNTAX IphelpereOption82ASCIIFieldType 
            MAX-ACCESS  read-write
            STATUS  deprecated
            DESCRIPTION
                "The type of the second field in the Option 82 string in ASCII format,
                 which will be copied to Option-82 circuit id of the DHCP packet.
		 This Field is applicable only, if the option 82 format type is ASCII. This
                 object is deprecated by the objects in iphelperDhcpSnoopingOption82FormatASCIIConfigurableTable."
            DEFVAL { none }
     ::= { iphelperMIB 33 }

    iphelperDhcpSnoopingOption82FormatASCIIField2StringValue OBJECT-TYPE
            SYNTAX      DisplayString (SIZE (0..63))
            MAX-ACCESS read-write
            STATUS deprecated
            DESCRIPTION
                "The string value of the second field in the Option 82 string in ASCII 
                 format, which will be copied to Option-82 circuit id of the DHCP packet.
                 This Field is applicable only, if the option 82 format type is ASCII. This
                 object is deprecated by the objects in iphelperDhcpSnoopingOption82FormatASCIIConfigurableTable."
     ::= { iphelperMIB 34 }

    iphelperDhcpSnoopingOption82FormatASCIIField3 OBJECT-TYPE
            SYNTAX IphelpereOption82ASCIIFieldType
            MAX-ACCESS  read-write
            STATUS  deprecated
            DESCRIPTION
                "The type of the third field in the Option 82 string in ASCII format,
                 which will be copied to Option-82 circuit id of the DHCP packet.
		 This Field is applicable only, if the option 82 format type is ASCII. This
                 object is deprecated by the objects in iphelperDhcpSnoopingOption82FormatASCIIConfigurableTable."
            DEFVAL { none }
     ::= { iphelperMIB 35 }

    iphelperDhcpSnoopingOption82FormatASCIIField3StringValue OBJECT-TYPE
            SYNTAX      DisplayString (SIZE (0..63))
            MAX-ACCESS read-write
            STATUS deprecated
            DESCRIPTION
                "The string value of the third field in the Option 82 string in ASCII 
                 format, which will be copied to Option-82 circuit id of the DHCP packet.
                 This Field is applicable only, if the option 82 format type is ASCII. This
                 object is deprecated by the objects in iphelperDhcpSnoopingOption82FormatASCIIConfigurableTable."
     ::= { iphelperMIB 36 }


    iphelperDhcpSnoopingOption82FormatASCIIField4 OBJECT-TYPE
            SYNTAX IphelpereOption82ASCIIFieldType
            MAX-ACCESS  read-write
            STATUS  deprecated
            DESCRIPTION
                "The type of the fourth field in the Option 82 string in ASCII format,
                 which will be copied to Option-82 circuit id of the DHCP packet.
		 This Field is applicable only, if the option 82 format type is ASCII. This
                 object is deprecated by the objects in iphelperDhcpSnoopingOption82FormatASCIIConfigurableTable."
            DEFVAL { none }
     ::= { iphelperMIB 37 }

    iphelperDhcpSnoopingOption82FormatASCIIField4StringValue OBJECT-TYPE
            SYNTAX      DisplayString (SIZE (0..63))
            MAX-ACCESS read-write
            STATUS deprecated
            DESCRIPTION
                "The string value of the fourth field in the Option 82 string in ASCII 
                 format, which will be copied to Option-82 circuit id of the DHCP packet.
                 This Field is applicable only, if the option 82 format type is ASCII. This
                 object is deprecated by the objects in iphelperDhcpSnoopingOption82FormatASCIIConfigurableTable."
     ::= { iphelperMIB 38 }


    iphelperDhcpSnoopingOption82FormatASCIIField5 OBJECT-TYPE
            SYNTAX IphelpereOption82ASCIIFieldType
            MAX-ACCESS  read-write
            STATUS  deprecated
            DESCRIPTION
                "The type of the fifth field in the Option 82 string in ASCII format,
                 which will be copied to Option-82 circuit id of the DHCP packet.
		 This Field is applicable only, if the option 82 format type is ASCII. This
                 object is deprecated by the objects in iphelperDhcpSnoopingOption82FormatASCIIConfigurableTable."
            DEFVAL { none }
     ::= { iphelperMIB 39 }

    iphelperDhcpSnoopingOption82FormatASCIIField5StringValue OBJECT-TYPE
            SYNTAX      DisplayString (SIZE (0..63))
            MAX-ACCESS read-write
            STATUS deprecated 
            DESCRIPTION
                "The string value of the fifth field in the Option 82 string in ASCII 
                 format, which will be copied to Option-82 circuit id of the DHCP packet.
                 This Field is applicable only, if the option 82 format type is ASCII. This
                 object is deprecated by the objects in iphelperDhcpSnoopingOption82FormatASCIIConfigurableTable."
     ::= { iphelperMIB 40 }


    iphelperDhcpSnoopingOption82FormatASCIIDelimiter OBJECT-TYPE
            SYNTAX      DisplayString (SIZE (0..63))
            MAX-ACCESS read-write
            STATUS deprecated
            DESCRIPTION
                "The value of the delimiter that is inserted between the fields in the  
                 Option 82 string in ASCII format, which will be copied to Option-82 
		 circuit id of the DHCP packet. This value is applicable only, if the  
		 option 82 format type is ASCII. This object is deprecated by the
                 objects in iphelperDhcpSnoopingOption82FormatASCIIConfigurableTable."
     ::= { iphelperMIB 41 }

     iphelperDhcpSourceFilterVlanTable OBJECT-TYPE
             SYNTAX SEQUENCE OF IphelperDhcpSourceFilterVlanEntry
             MAX-ACCESS not-accessible
             STATUS  current
             DESCRIPTION
                "A list of vlans that have ip-source-filtering enabled."
     ::= { iphelperMIB 42 }

    iphelperOption82Policy OBJECT-TYPE
          SYNTAX INTEGER
                  {
                    drop(1),
                    keep(2),
                    replace(3)
                  }
          MAX-ACCESS read-write
          STATUS current
          DESCRIPTION
                  "This is only significant for the BOOTP/DHCP service.  It allows the user to
                  select the option-82 insertion policy of either drop, keep or replace the
                  option-82 information if it is already present in the DHCP packet."
          DEFVAL { replace }
    ::= {iphelperMIB 43}

   iphelperDhcpSnoopingOption82FormatASCIIConfigurableTable OBJECT-TYPE
	  SYNTAX SEQUENCE OF IphelperDhcpSnoopingOption82FormatASCIIConfigurableEntry
	  MAX-ACCESS not-accessible
	  STATUS current
	  DESCRIPTION
	       	"A list of ascii fields used for Circuit ID or Remote ID."
   ::= { iphelperMIB 44 }


    iphelperDhcpSourceFilterVlanEntry  OBJECT-TYPE
            SYNTAX  IphelperDhcpSourceFilterVlanEntry
            MAX-ACCESS  not-accessible
            STATUS  current
            DESCRIPTION
                "A Source Filtering enabled VLAN entry."
            INDEX { iphelperDhcpSourceFilterVlanNumber }
    ::= { iphelperDhcpSourceFilterVlanTable 1 }

    IphelperDhcpSourceFilterVlanEntry ::= SEQUENCE {
            iphelperDhcpSourceFilterVlanNumber
                Integer32,
            iphelperDhcpSourceFilterVlanFilteringStatus
                INTEGER
        }

   iphelperDhcpSourceFilterVlanNumber  OBJECT-TYPE
           SYNTAX  Integer32 (1..4094)
           MAX-ACCESS not-accessible
           STATUS  current
           DESCRIPTION
              "The VLAN number identifying this instance. Valid
               range from 1 to 4094."
    ::= { iphelperDhcpSourceFilterVlanEntry 1 }

   iphelperDhcpSourceFilterVlanFilteringStatus OBJECT-TYPE
           SYNTAX  INTEGER {
                enabled(1),
                disabled(2)
            }
           MAX-ACCESS  read-write
           STATUS  current
           DESCRIPTION
                "The DHCP Snooping IP Source filtering  status. Default value
                 is disabled. Once enabled, only the incoming traffic with the proper
                 client IP address, MAC address , port and vlan will be allowed."
                 DEFVAL { disabled }
    ::= { iphelperDhcpSourceFilterVlanEntry 2 }


   iphelperDhcpSnoopingOption82FormatASCIIConfigurableEntry OBJECT-TYPE
	  SYNTAX    IphelperDhcpSnoopingOption82FormatASCIIConfigurableEntry
	  MAX-ACCESS  not-accessible
	  STATUS current
	  DESCRIPTION
		"An ascii field entry for Circuit ID or Remote ID."
	  INDEX { iphelperDhcpSnoopingOption82FormatASCIIConfigurableIndex }
   ::= { iphelperDhcpSnoopingOption82FormatASCIIConfigurableTable 1 }

   IphelperDhcpSnoopingOption82FormatASCIIConfigurableEntry ::= SEQUENCE {
		iphelperDhcpSnoopingOption82FormatASCIIConfigurableIndex  	IphelperOption82CircuitOrRemoteId,
		iphelperDhcpSnoopingOption82FormatASCIIConfigurableField1	IphelpereOption82ASCIIFieldType,
		iphelperDhcpSnoopingOption82FormatASCIIConfigurableField1StrVal SnmpAdminString,
		iphelperDhcpSnoopingOption82FormatASCIIConfigurableField2	IphelpereOption82ASCIIFieldType,
		iphelperDhcpSnoopingOption82FormatASCIIConfigurableField2StrVal SnmpAdminString,
		iphelperDhcpSnoopingOption82FormatASCIIConfigurableField3	IphelpereOption82ASCIIFieldType,
		iphelperDhcpSnoopingOption82FormatASCIIConfigurableField3StrVal SnmpAdminString,
		iphelperDhcpSnoopingOption82FormatASCIIConfigurableField4	IphelpereOption82ASCIIFieldType,
		iphelperDhcpSnoopingOption82FormatASCIIConfigurableField4StrVal SnmpAdminString,
		iphelperDhcpSnoopingOption82FormatASCIIConfigurableField5	IphelpereOption82ASCIIFieldType,
		iphelperDhcpSnoopingOption82FormatASCIIConfigurableField5StrVal SnmpAdminString,
		iphelperDhcpSnoopingOption82FormatASCIIConfigurableDelimiter	SnmpAdminString,
		iphelperDhcpSnoopingOption82FormatASCIIConfigurableStatus	RowStatus
	}
	  
   iphelperDhcpSnoopingOption82FormatASCIIConfigurableIndex OBJECT-TYPE
	  SYNTAX	IphelperOption82CircuitOrRemoteId
	  MAX-ACCESS  not-accessible
	  STATUS current
	  DESCRIPTION
		"This object specifies the either circuit id or remote id for option82."
   ::= { iphelperDhcpSnoopingOption82FormatASCIIConfigurableEntry 1 }

   iphelperDhcpSnoopingOption82FormatASCIIConfigurableField1 OBJECT-TYPE
          SYNTAX        IphelpereOption82ASCIIFieldType
	  MAX-ACCESS  read-create
          STATUS  current
          DESCRIPTION
                "The type of the first field in the Option 82 string in ASCII format,
                 which will be copied to Option-82 circuit id or remote id of the DHCP packet.
                 This Field is applicable only, if the option 82 format type is ASCII."
   ::= { iphelperDhcpSnoopingOption82FormatASCIIConfigurableEntry 2 }

   iphelperDhcpSnoopingOption82FormatASCIIConfigurableField1StrVal OBJECT-TYPE       
	  SYNTAX	SnmpAdminString (SIZE (0..63))
	  MAX-ACCESS 	read-create
	  STATUS 	current
	  DESCRIPTION
		"The string value of the first field in the Option 82 string in ASCII
                 format, which will be copied to Option-82 circuit id or remote id of the DHCP packet.
                 This Field is applicable only, if the option 82 format type is ASCII"
	  DEFVAL { " - " }
   ::= { iphelperDhcpSnoopingOption82FormatASCIIConfigurableEntry 3 }

   iphelperDhcpSnoopingOption82FormatASCIIConfigurableField2 OBJECT-TYPE       
          SYNTAX        IphelpereOption82ASCIIFieldType
          MAX-ACCESS  read-create
          STATUS  current    
          DESCRIPTION
		"The type of the second field in the Option 82 string in ASCII format,
                 which will be copied to Option-82 circuit id or remote id of the DHCP packet.
                 This Field is applicable only, if the option 82 format type is ASCII"
            DEFVAL { none }
   ::= { iphelperDhcpSnoopingOption82FormatASCIIConfigurableEntry 4 } 

   iphelperDhcpSnoopingOption82FormatASCIIConfigurableField2StrVal OBJECT-TYPE
	  SYNTAX        SnmpAdminString (SIZE (0..63))
	  MAX-ACCESS    read-create
          STATUS        current
          DESCRIPTION
		"The string value of the second field in the Option 82 string in ASCII
                 format, which will be copied to Option-82 circuit id or remote id of the DHCP packet.
                 This Field is applicable only, if the option 82 format type is ASCII"
	  DEFVAL { " - " }
   ::= { iphelperDhcpSnoopingOption82FormatASCIIConfigurableEntry 5 }

   iphelperDhcpSnoopingOption82FormatASCIIConfigurableField3 OBJECT-TYPE
          SYNTAX        IphelpereOption82ASCIIFieldType
          MAX-ACCESS  read-create
          STATUS  current   
          DESCRIPTION
                "The type of the third field in the Option 82 string in ASCII format,
                 which will be copied to Option-82 circuit id or remote id of the DHCP packet.
                 This Field is applicable only, if the option 82 format type is ASCII"
            DEFVAL { none }
   ::= { iphelperDhcpSnoopingOption82FormatASCIIConfigurableEntry 6 }

   iphelperDhcpSnoopingOption82FormatASCIIConfigurableField3StrVal OBJECT-TYPE
          SYNTAX        SnmpAdminString (SIZE (0..63))
          MAX-ACCESS    read-create
          STATUS        current
          DESCRIPTION
                "The string value of the third field in the Option 82 string in ASCII
                 format, which will be copied to Option-82 circuit id or remote id of the DHCP packet.
                 This Field is applicable only, if the option 82 format type is ASCII"
	  DEFVAL { " - " }
   ::= { iphelperDhcpSnoopingOption82FormatASCIIConfigurableEntry 7 }

   iphelperDhcpSnoopingOption82FormatASCIIConfigurableField4 OBJECT-TYPE
          SYNTAX        IphelpereOption82ASCIIFieldType
          MAX-ACCESS  read-create
          STATUS  current   
          DESCRIPTION
                "The type of the fourth  field in the Option 82 string in ASCII format,
                 which will be copied to Option-82 circuit id or remote id of the DHCP packet.
                 This Field is applicable only, if the option 82 format type is ASCII"
            DEFVAL { none }
   ::= { iphelperDhcpSnoopingOption82FormatASCIIConfigurableEntry 8 }

   iphelperDhcpSnoopingOption82FormatASCIIConfigurableField4StrVal OBJECT-TYPE
	  SYNTAX	SnmpAdminString (SIZE (0..63))
	  MAX-ACCESS    read-create
          STATUS        current
          DESCRIPTION
                "The string value of the fourth field in the Option 82 string in ASCII
                 format, which will be copied to Option-82 circuit id or remote id of the DHCP packet.
                 This Field is applicable only, if the option 82 format type is ASCII"
	  DEFVAL { " - " }
   ::= { iphelperDhcpSnoopingOption82FormatASCIIConfigurableEntry 9 }

   iphelperDhcpSnoopingOption82FormatASCIIConfigurableField5 OBJECT-TYPE
          SYNTAX        IphelpereOption82ASCIIFieldType
          MAX-ACCESS  read-create
          STATUS  current   
          DESCRIPTION
                "The type of the fifth field in the Option 82 string in ASCII format,
                 which will be copied to Option-82 circuit id or remote id of the DHCP packet.
                 This Field is applicable only, if the option 82 format type is ASCII"
            DEFVAL { none }
   ::= { iphelperDhcpSnoopingOption82FormatASCIIConfigurableEntry 10 }

   iphelperDhcpSnoopingOption82FormatASCIIConfigurableField5StrVal OBJECT-TYPE
	  SYNTAX        SnmpAdminString (SIZE (0..63))
          MAX-ACCESS    read-create
          STATUS        current
          DESCRIPTION
                "The string value of the fifth field in the Option 82 string in ASCII
                 format, which will be copied to Option-82 circuit id or remote id of the DHCP packet.
                 This Field is applicable only, if the option 82 format type is ASCII"
	  DEFVAL { " - " }
   ::= { iphelperDhcpSnoopingOption82FormatASCIIConfigurableEntry 11 }

   iphelperDhcpSnoopingOption82FormatASCIIConfigurableDelimiter OBJECT-TYPE
          SYNTAX      SnmpAdminString (SIZE (0..63))
          MAX-ACCESS read-create
          STATUS current
          DESCRIPTION
                "The value of the delimiter that is inserted between the fields in the
                 Option 82 string in ASCII format, which will be copied to Option-82
                 circuit id or remote id of the DHCP packet. This value is applicable only, if the
                 option 82 format type is ASCII"
	  DEFVAL { "" }
  ::= { iphelperDhcpSnoopingOption82FormatASCIIConfigurableEntry 12 }

  iphelperDhcpSnoopingOption82FormatASCIIConfigurableStatus OBJECT-TYPE
          SYNTAX        RowStatus
	  MAX-ACCESS  read-create
	  STATUS  current   
          DESCRIPTION
		"This object specifies the status of the entry."
  ::= { iphelperDhcpSnoopingOption82FormatASCIIConfigurableEntry 13 } 

   iphelperDhcpSourceFilterAllowSubnetTable OBJECT-TYPE
     SYNTAX SEQUENCE OF IphelperDhcpSourceFilterAllowIpEntry
     MAX-ACCESS not-accessible
     STATUS current
     DESCRIPTION
     "A list of ip address that have exempted from ip-source-filtering enabled."
         ::= { iphelperMIB 48 }

   iphelperDhcpSourceFilterAllowIpEntry OBJECT-TYPE
   SYNTAX IphelperDhcpSourceFilterAllowIpEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
   "A Source Filtering exempted ip enabled entry."
   INDEX { iphelperDhcpSourceFilterExpIpAddress,  iphelperDhcpSourceFilterExpIpMask, iphelperDhcpSourceFilterVlan}
   ::= { iphelperDhcpSourceFilterAllowSubnetTable 1 }

   IphelperDhcpSourceFilterAllowIpEntry ::= SEQUENCE {
   iphelperDhcpSourceFilterExpIpAddress
   IpAddress,
   iphelperDhcpSourceFilterExpIpMask
   IpAddress,
   iphelperDhcpSourceFilterVlan
   Integer32,
   iphelperDhcpSourceFilterExpIpStatus
   INTEGER
   }
   
   iphelperDhcpSourceFilterExpIpAddress OBJECT-TYPE
   SYNTAX IpAddress
   MAX-ACCESS read-write
   STATUS current
   DESCRIPTION
   "The Ip address identifying this instance"
   ::= { iphelperDhcpSourceFilterAllowIpEntry 1 }

   iphelperDhcpSourceFilterExpIpMask OBJECT-TYPE
   SYNTAX IpAddress
   MAX-ACCESS read-write
   STATUS current
   DESCRIPTION
   "The Mask address identifying this instance"
   ::= { iphelperDhcpSourceFilterAllowIpEntry 2 }

   iphelperDhcpSourceFilterVlan OBJECT-TYPE
   SYNTAX Integer32 (1..4094)
   MAX-ACCESS read-write
   STATUS current
   DESCRIPTION
   "The VLAN number identifying this instance. Valid
   range from 1 to 4094."
   ::= { iphelperDhcpSourceFilterAllowIpEntry 3 }

   iphelperDhcpSourceFilterExpIpStatus  OBJECT-TYPE
   SYNTAX  INTEGER {
   enabled(1),
   disabled(2)
   }
   MAX-ACCESS  read-write
   STATUS current
   DESCRIPTION
   "The DHCP snooping IP source filtering exception for subnets status. Default value
   is disabled. Once enabled, only the incoming traffic with the configured
   IP address on vlan will be allowed."
   DEFVAL { disabled }
   ::= { iphelperDhcpSourceFilterAllowIpEntry 4 }

    iphelperDhcpSnoopingTrapStatus OBJECT-TYPE
    SYNTAX  INTEGER {
             default(0),
             reverse-enable(1),
             hardware(2),
             software(3)
           }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "This is only significant for the BOOTP/DHCP service.  It
     allows the user to to configure  trap-mode for snooping."
    DEFVAL { default }
    ::= {iphelperMIB 49}

  -- MDNS Relay --

  alaMdnsGreTunnelName OBJECT-TYPE
     SYNTAX DisplayString
     MAX-ACCESS read-write
     STATUS current
          DESCRIPTION
       "Specifies the tunnel name for the mdns feature."
  ::= { iphelperMIB 45 }

  alaMdnsAdminStatus OBJECT-TYPE
     SYNTAX INTEGER {
       enabled(1),
       disabled(2)
     }
     MAX-ACCESS read-write
     STATUS current
          DESCRIPTION
       "Mdns global status"
     DEFVAL { disabled }
  ::= { iphelperMIB 46 }

  alaMdnsFloodVlans OBJECT-TYPE
     SYNTAX VlanBitmap
     MAX-ACCESS read-write
     STATUS current
     DESCRIPTION
       "Mdns flood vlans"
  ::= { iphelperMIB 47 }

iphelperDhcpSnoopingArpAllowStatus OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	enabled(1),
	    	disabled(2)
	    }
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"This object specifies if the capability to allow arp packets is enabled
		 or not when the ISF mode is enabled. By default, it is enabled.
		 It is applicable for both switch-level or vlan-level DHCP Snooping."
	    DEFVAL { disabled }
     ::= { iphelperMIB 50 }
--
--  DHCPV6 Mib's
--
   ipv6helperMIB OBJECT IDENTIFIER ::= { alcatelIND1UDPRelayMIBObjects 2 }
   ipv6helperTable OBJECT-TYPE
      SYNTAX SEQUENCE OF Ipv6helperEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
      		"A list of active DHCPV6 Relay Service instances."
  ::= { ipv6helperMIB 1 }
  ipv6helperEntry  OBJECT-TYPE
    SYNTAX	Ipv6helperEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
    		" An entry in DHCPV6 table"
    INDEX { ipv6helperForwAddr ,ipv6helperVlan }
    ::= { ipv6helperTable 1 }
    Ipv6helperEntry ::= SEQUENCE {
      ipv6helperForwAddr
      		InetAddressIPv6,
      ipv6helperVlan
               INTEGER,
      ipv6helperStatus
       RowStatus
   }
   ipv6helperForwAddr OBJECT-TYPE
  	SYNTAX InetAddressIPv6 
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
		"This specifies relayed service's forwarding address.
		 This object is used set DHCPV6 server IPv6 address."
   ::= { ipv6helperEntry 1 }
   ipv6helperVlan OBJECT-TYPE
        SYNTAX  INTEGER (0..4094)
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
		"This specifies a Vlan to which the service is to be forwarded.
		  a value of 0 indicates that no vlan is being used."
   ::= { ipv6helperEntry 2 }
   ipv6helperStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
            "Row Status for creating/deleting"
   ::= { ipv6helperEntry 3 }
   ipv6helperForwardOption OBJECT-TYPE
	SYNTAX INTEGER
		{
		  standard(1),
                  perVlanOnly(2)
		}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"This object is to indicate whether relay should work system wide 
                 or per vlan.  Default value is standard"
   ::= {ipv6helperMIB  2}
   ipv6helperMaxHops OBJECT-TYPE
	SYNTAX Unsigned32 (1..32)
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"This sets the DHCPv6 relay's maximum hops
		forwarding limit . If a frame arrives with hopcount greater than
	or equal to ipv6helperMaxHops, it will be dropped."
        DEFVAL { 32 }
   ::= {ipv6helperMIB  3}
   ipv6helperDhcpSnooping OBJECT-TYPE
            SYNTAX INTEGER
                {
                  switchLevel(1),
                  disabled(2),
                  vlanLevel(3)
                }
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION
                    "Enabling LDRA/DHCPv6 Snooping at the switch level. For the vlan level,
                     it is enabled implicitly when an individual vlan's LDRA/DHCPv6 Snooping
                     is enbled."
        DEFVAL { disabled }
   ::= {ipv6helperMIB 4}
   ipv6helperDhcpSnoopingVlanTable OBJECT-TYPE
        SYNTAX SEQUENCE OF Ipv6helperDhcpSnoopingVlanEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
                "A list of vlans that have LDRA/DHCPv6 Snooping enabled."
   ::= { ipv6helperMIB 5 }
   ipv6helperDhcpSnoopingVlanEntry  OBJECT-TYPE
	SYNTAX  Ipv6helperDhcpSnoopingVlanEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"A LDRA/DHCPv6 Snooping VLAN entry."
	INDEX { ipv6helperDhcpSnoopingVlanNumber }
   ::= { ipv6helperDhcpSnoopingVlanTable 1 }
   Ipv6helperDhcpSnoopingVlanEntry ::= SEQUENCE {
	ipv6helperDhcpSnoopingVlanNumber
		INTEGER,
        ipv6helperDhcpSnoopingVlanStatus
		RowStatus
	}
   ipv6helperDhcpSnoopingVlanNumber  OBJECT-TYPE
	    SYNTAX  INTEGER (1..4094)
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		 "The VLAN number identifying this instance. Valid
		  range from 1 to 4094."
   ::= { ipv6helperDhcpSnoopingVlanEntry 1 }
   ipv6helperDhcpSnoopingVlanStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
            "Row Status for creating/deleting"
   ::= { ipv6helperDhcpSnoopingVlanEntry 2 }
 
   ipv6helperDhcpSnoopingPortTable OBJECT-TYPE
	SYNTAX SEQUENCE OF Ipv6helperDhcpSnoopingPortEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
      		"A list of ports that have LDRA/DHCPv6 Snooping trust status."
   ::= { ipv6helperMIB 6 }
   ipv6helperDhcpSnoopingPortEntry  OBJECT-TYPE
	SYNTAX  Ipv6helperDhcpSnoopingPortEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"A LDRA/DHCP Snooping Port entry."
	INDEX { ipv6helperDhcpSnoopingPortIfIndex }
   ::= { ipv6helperDhcpSnoopingPortTable 1 }
   Ipv6helperDhcpSnoopingPortEntry ::= SEQUENCE {
	ipv6helperDhcpSnoopingPortIfIndex
		InterfaceIndex,
	ipv6helperDhcpSnoopingPortTrustMode
		INTEGER,
        ipv6helperSnoopingClientViolation
                Counter32,
        ipv6helperSnoopingServerViolation
                Counter32,
        ipv6helperSnoopingBindingViolation
                Counter32,
        ipv6helperSnoopingInterfaceidViolation
                Counter32,
		ipv6helperSnoopingPortSourceFilterStatus
				INTEGER
   }
   ipv6helperDhcpSnoopingPortIfIndex  OBJECT-TYPE
	    SYNTAX  InterfaceIndex
	    MAX-ACCESS  read-only
	    STATUS  current
	    DESCRIPTION
		 "The ifIndex subindex identifying this instance."
   ::= { ipv6helperDhcpSnoopingPortEntry 1 }
   ipv6helperDhcpSnoopingPortTrustMode OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	blocked(1),
		clientOnlyUntrusted(2),
		clientOnlyTrusted(3),
	    	trusted(4)
	    }
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"The LDRA/DHCPv6 Snooping's VLAN port's trust mode. Default value
	  	 is clientOnlyUntrusted, which means once the VLAN is enabled for DHCPv6
		 snooping, the vlan ports only allow DHCPv6 client packets. Blocked
		 means all DHCPv6 traffic is block on the port. clientOnlyTrusted means 
                 DHCPV6 client and Relay-Foward msg from another relay agent is allowed.
                 Trusted means all DHCPv6 traffic is allowed on the port."
		 DEFVAL { clientOnlyUntrusted }
   ::= { ipv6helperDhcpSnoopingPortEntry 2 }
   ipv6helperSnoopingClientViolation OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS current
        DESCRIPTION
              "This keeps track of the number client violation packets dropped."
   ::= { ipv6helperDhcpSnoopingPortEntry 3}
   ipv6helperSnoopingServerViolation OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS current
        DESCRIPTION
              "This keeps track of the number of server violation packets received/dropped , server 
                packet received on client port."
   ::= { ipv6helperDhcpSnoopingPortEntry 4}
   ipv6helperSnoopingBindingViolation OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS current
        DESCRIPTION
              "This keeps track of the number of packets dropped due to mismacthed binding entry
                with client infomration."
   ::= { ipv6helperDhcpSnoopingPortEntry 5}
   ipv6helperSnoopingInterfaceidViolation OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS current
        DESCRIPTION
              "This keeps track of the number of packets dropped due to invalid interface id value
               from DHCP server in Relay Agent Information option in the DHCP packet."
   ::= { ipv6helperDhcpSnoopingPortEntry 6}
   ipv6helperSnoopingPortSourceFilterStatus OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	enabled(1),
	    	disabled(2)
	    }
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"IPV6 Source filtering  status. Default value is disabled.
		 Once enabled, only the incoming traffic with the proper
  		 client IPV6 address, MAC address and port will be allowed."
		 DEFVAL { disabled }
   ::= { ipv6helperDhcpSnoopingPortEntry 7}
   
   ipv6helperDhcpSnoopingBindingStatus OBJECT-TYPE
            SYNTAX  INTEGER {
                enabled(1),
                disabled(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "This object specifies if the capability of building the DHCPv6 Snooping
                 Binding Table/Database is enable or not. By default, it is enabled.
                 It is applicable for both switch-level or vlan-level DHCPv6 Snooping."
            DEFVAL { enabled }
   ::= { ipv6helperMIB 7 }
   ipv6helperDhcpSnoopingBindingTable OBJECT-TYPE
	SYNTAX SEQUENCE OF Ipv6helperDhcpSnoopingBindingEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
      		"DHCP Snooping binding table."
   ::= { ipv6helperMIB 8 }
   ipv6helperDhcpSnoopingBindingEntry  OBJECT-TYPE
	SYNTAX  Ipv6helperDhcpSnoopingBindingEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"A LDRA/DHCPv6 Snooping binding entry."
	INDEX { ipv6helperBindingLinkLocalAddress, ipv6helperBindingVlan, ipv6helperBindingIfIndex }
   ::= { ipv6helperDhcpSnoopingBindingTable 1 }
   Ipv6helperDhcpSnoopingBindingEntry ::= SEQUENCE {
        ipv6helperBindingLinkLocalAddress
		InetAddressIPv6,
	ipv6helperBindingVlan
		INTEGER,
	ipv6helperBindingIfIndex
		InterfaceIndex,
	ipv6helperBindingGlobalIpv6Address
		InetAddressIPv6,
	ipv6helperBindingLeaseTime
		Unsigned32,
        ipv6helperBindingRowStatus
		RowStatus
	}
   ipv6helperBindingLinkLocalAddress OBJECT-TYPE
	    SYNTAX InetAddressIPv6 
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		 "The Link loacl Address subindex identifying this instance."
   ::= { ipv6helperDhcpSnoopingBindingEntry 1 }
   ipv6helperBindingVlan OBJECT-TYPE
            SYNTAX  INTEGER (1..4094)
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "It is the VLAN Id where the DHCP client belongs to."
   ::= { ipv6helperDhcpSnoopingBindingEntry 2 }
   ipv6helperBindingIfIndex OBJECT-TYPE
	    SYNTAX  InterfaceIndex
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"The IfIndex subindex identifying this instance. It is the
	 	 the interface where the DHCP request is coming in from."
   ::= { ipv6helperDhcpSnoopingBindingEntry 3 }
   ipv6helperBindingGlobalIpv6Address OBJECT-TYPE
	SYNTAX	InetAddressIPv6
	MAX-ACCESS	read-create
	STATUS current
	DESCRIPTION
              "The Ip Address offered by the DHCP Server to the Client."
   ::= { ipv6helperDhcpSnoopingBindingEntry 4 }
   ipv6helperBindingLeaseTime  OBJECT-TYPE
	SYNTAX	Unsigned32
	MAX-ACCESS	read-only
	STATUS current
	DESCRIPTION
              "The lease time of the client's IP Address."
   ::= { ipv6helperDhcpSnoopingBindingEntry 5 }
   ipv6helperBindingRowStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
            "Row Status for creating/deleting"
   ::= { ipv6helperDhcpSnoopingBindingEntry 6 }
   ipv6helperDhcpSnoopingBindingDatabaseSyncTimeout OBJECT-TYPE
            SYNTAX      Unsigned32 (180..600)
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "The DHCPv6 Snooping Binding Database synchronization timeout value. It is
                 used to specify the synchronization frequency, in seconds, between the
                 binding table in memory and the binding file in flash."
            DEFVAL { 300 }
   ::= { ipv6helperMIB 9 }
   ipv6helperDhcpSnoopingBindingDatabaseLastSyncTime OBJECT-TYPE
            SYNTAX      DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "The time stamp of the last successuful DHCPv6 Snooping Binding
                 Database synchronization."
   ::= { ipv6helperMIB 10 }
   ipv6helperDhcpSnoopingBindingDatabaseAction OBJECT-TYPE
        SYNTAX INTEGER {
                noaction(0),
                purge(1),
                renew(2)
        }
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "This object identifies the action to be performed. Purge:
                 means to clear the binding table entries in the memory.
                 Renew: means to populate the binding table entries from the
                 flash file."
            DEFVAL { noaction }
   ::= { ipv6helperMIB 11 }
   ipv6helperDhcpSnoopingBindingPersistencyStatus OBJECT-TYPE
            SYNTAX  INTEGER {
                enabled(1),
                disabled(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "DHCP Snooping binding table persistency check status. By default, it is disabled.
                 Once enabled, the binding entries expiry will be solely depend on Lease time"
            DEFVAL { disabled }
   ::= { ipv6helperMIB 12 }
   ipv6helperStatTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF Ipv6helperStatEntry
	MAX-ACCESS	not-accessible
	STATUS	current
	DESCRIPTION
		"This keeps statistics for DHCPv6 server address."
   ::= { ipv6helperMIB 13 }
   ipv6helperStatEntry  OBJECT-TYPE
	SYNTAX  Ipv6helperStatEntry
	MAX-ACCESS  not-accessible
	STATUS	current
	DESCRIPTION
		"An entry in the stat table."
  	INDEX {ipv6helperStatsServerAddress, ipv6helperStatsVlan}
   ::= { ipv6helperStatTable 1 }
   Ipv6helperStatEntry ::= SEQUENCE {
	ipv6helperStatsServerAddress
                InetAddressIPv6,
        ipv6helperStatsVlan
                INTEGER,
        ipv6helperTxToServer
                Unsigned32
		}
  ipv6helperStatsServerAddress  OBJECT-TYPE
        SYNTAX InetAddressIPv6 
	MAX-ACCESS read-only 
	STATUS	current
	DESCRIPTION
               "This specifies the unique server address."
   ::= { ipv6helperStatEntry 1 }
   ipv6helperStatsVlan OBJECT-TYPE
            SYNTAX  INTEGER (1..4094)
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "It is the VLAN Id of the server for which stats 
                 displayed in case of vlan level relay configured."
   ::= { ipv6helperStatEntry 2 }
   ipv6helperTxToServer  OBJECT-TYPE
	SYNTAX	Unsigned32 (0..65535)
	MAX-ACCESS read-only 
	STATUS current
	DESCRIPTION
              " This keeps track of the number of packets transmitted  to the server."
   ::= { ipv6helperStatEntry  3}
   ipv6helperInterfaceIdPrefixValue OBJECT-TYPE
            SYNTAX  DisplayString (SIZE (0..246))
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "The value of the string that will be added along with the standard 
                 interface id ((chassis group(1 byte), chassis id(1 byte), vlan(2 byte)  
                 and ifIndex(4 byte)) by the relay agent."
            DEFVAL  { "" }
   ::= { ipv6helperMIB 14 }
   ipv6helperRemoteIdEnterpriseNumber OBJECT-TYPE
           SYNTAX  Unsigned32 (1..4294967295)
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION
                "The value of the Enterprise Number that will be used in the remote id
                 sub options."
   ::= { ipv6helperMIB 15 }
   ipv6helperRemoteIdUserStringValue OBJECT-TYPE
            SYNTAX      DisplayString (SIZE (0..63))
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION
                "The value of the string that will be used in the remote id
                 sub options."
   ::= { ipv6helperMIB 16 }
   ipv6helperRemoteIdFormatType OBJECT-TYPE
            SYNTAX  INTEGER {
                disabled(1),
                baseMacAddress(2),
                systemName(3),
                vlan(4),
                userString(5),
                interfaceAlias(6),
                autoInterfaceAlias(7)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "DHCPv6 remote-id defines the type of information carried in remote id option 
                 fields. ipv6helperRemoteIdEnterpriseNumber should be configured before configuring 
                 specifying ipv6helperRemoteIdFormatType.  If the type selected is string the 
                 actual value of the string can be found in ipv6helperRemoteIdUserStringValue."
            DEFVAL { disabled }
   ::= { ipv6helperMIB 17 }
   ipv6helperRxFromClient OBJECT-TYPE
        SYNTAX  Unsigned32 (0..65535)
        MAX-ACCESS read-only
        STATUS  current
        DESCRIPTION
                "This keeps track of the number of packets recieved from the client."
   ::= { ipv6helperMIB 18 }
   ipv6helperMaxHopsViolation  OBJECT-TYPE
        SYNTAX  Unsigned32 (0..65535)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
              " This keeps track of the number of packets dropped due to max hops violation."
   ::= { ipv6helperMIB 19 }
   ipv6helperResetAll  OBJECT-TYPE
        SYNTAX  INTEGER {
                enabled(1),
                disabled(2)
        }
        MAX-ACCESS      read-write
        STATUS current
        DESCRIPTION
            "This parameter resets all the stats."
   ::= { ipv6helperMIB 20 }

   ipv6helperSourceFilterVlanTable OBJECT-TYPE
             SYNTAX SEQUENCE OF Ipv6helperSourceFilterVlanEntry
             MAX-ACCESS not-accessible
             STATUS  current
             DESCRIPTION
                "A list of vlans that have ipv6-source-filtering enabled."
     ::= { ipv6helperMIB 21 }

   ipv6helperSourceFilterVlanEntry  OBJECT-TYPE
            SYNTAX  Ipv6helperSourceFilterVlanEntry
            MAX-ACCESS  not-accessible
            STATUS  current
            DESCRIPTION
                "A Source Filtering enabled VLAN entry."
            INDEX { ipv6helperSourceFilterVlan }
    ::= { ipv6helperSourceFilterVlanTable 1 }

    Ipv6helperSourceFilterVlanEntry ::= SEQUENCE {
            ipv6helperSourceFilterVlan	Integer32,
            ipv6helperSourceFilterVlanStatus	INTEGER
        }

   ipv6helperSourceFilterVlan  OBJECT-TYPE
           SYNTAX  Integer32 (1..4094)
           MAX-ACCESS read-write
           STATUS  current
           DESCRIPTION
              "The VLAN number identifying this instance. Valid
               range from 1 to 4094."
    ::= { ipv6helperSourceFilterVlanEntry 1 }

   ipv6helperSourceFilterVlanStatus OBJECT-TYPE
           SYNTAX  INTEGER {
                enabled(1),
                disabled(2)
            }
           MAX-ACCESS  read-write
           STATUS  current
           DESCRIPTION
                "IPV6 Source filtering  status. Default value is disabled.
				 Once enabled, only the incoming traffic with the proper
                 client IPV6 address, MAC address , port and vlan will be allowed."
                 DEFVAL { disabled }
    ::= { ipv6helperSourceFilterVlanEntry 2 }

-- --------------------------------------------------------------
-- Trap Description
-- --------------------------------------------------------------
     alaDhcpClientTrapsDesc OBJECT IDENTIFIER ::= { alaDhcpClientTraps 1 }
     alaDhcpClientTrapsObj OBJECT IDENTIFIER ::= { alaDhcpClientTraps 2 }

-- Notifications

     alaDhcpClientAddressAddTrap NOTIFICATION-TYPE
     OBJECTS  {
               alaDhcpClientAddress
              }
     STATUS   current
     DESCRIPTION
                "When  new IP address is assigned to DHCP Client interface."
     ::= { alaDhcpClientTrapsDesc 0 1 }

     alaDhcpClientAddressExpiryTrap NOTIFICATION-TYPE
     OBJECTS  {
               alaDhcpClientAddress
              }
     STATUS   current
     DESCRIPTION
                "When the lease time expires or when DHCP client not 
                 able to renew/rebind an IP address."
     ::= { alaDhcpClientTrapsDesc 0 2 }

     alaDhcpClientAddressModifyTrap NOTIFICATION-TYPE
     OBJECTS  {
               alaDhcpClientAddress,
               alaDhcpClientNewAddress
              }
     STATUS   current
     DESCRIPTION
                "When the dhcp client not able to obtain the existing 
                IP address and new IP address is assigned to the DHCP client."
     ::= { alaDhcpClientTrapsDesc 0 3 }

      alaDhcpBindingDuplicateEntry NOTIFICATION-TYPE
      OBJECTS {
  		iphelperDhcpSnoopingBindingMacAddress,
  		iphelperDhcpSnoopingBindingVlan,
  		iphelperDhcpSnoopingBindingIfIndex,
                iphelperDhcpSnoopingBindingIfIndex
  	     }
      STATUS   current
      DESCRIPTION
  		"Trap to notify MAC Movement in DHCP-Binding Table
                  Mac Address, Vlan, Previous ifIndex, Current ifIndex"
  
       ::= { alaDhcpClientTrapsDesc 0 4 }
       
      alaDhcpBindingTcamFail NOTIFICATION-TYPE
      OBJECTS {
  		alaDhcpTcamFailMsg
        }
      STATUS   current
      DESCRIPTION
  		"Trap to notify DHCP Binding Failure due to TCAM resource failure."  
       ::= { alaDhcpClientTrapsDesc 0 5 }
       
      alaDhcpIsfDrop NOTIFICATION-TYPE
      OBJECTS {
        alaDhcpIsfDropIntervalStartTimeStamp,
  		alaDhcpIsfDropIntervalStopTimeStamp,
        alaDhcpIsfDropCount
        }
      STATUS   current
      DESCRIPTION
  		"Trap message to notify ISF drop."  
       ::= { alaDhcpClientTrapsDesc 0 6 }
       

-- Notification Objects

     alaDhcpClientAddress OBJECT-TYPE
     SYNTAX IpAddress
     MAX-ACCESS  accessible-for-notify
     STATUS  current
     DESCRIPTION
                "This object specifies the current IP address of the DHCP client."
     ::= { alaDhcpClientTrapsObj 1 }

     alaDhcpClientNewAddress OBJECT-TYPE
     SYNTAX IpAddress
     MAX-ACCESS  accessible-for-notify
     STATUS  current
     DESCRIPTION
                "This object specifies the new IP address assigned for the DHCP client."
     ::= { alaDhcpClientTrapsObj 2 }
     
     alaDhcpIsfDropIntervalStartTimeStamp OBJECT-TYPE
     SYNTAX OCTET STRING
     MAX-ACCESS  accessible-for-notify
     STATUS  current
     DESCRIPTION
                "This object specifies the start time of this ISF drop
                 monitoring interval."
     ::= { alaDhcpClientTrapsObj 3 }

     alaDhcpIsfDropIntervalStopTimeStamp OBJECT-TYPE
     SYNTAX OCTET STRING
     MAX-ACCESS  accessible-for-notify
     STATUS  current
     DESCRIPTION
                "This object specifies the end time of this ISF drop
                 monitoring interval. This is the time at which the 
                 trap message will be initiated."
     ::= { alaDhcpClientTrapsObj 4 }

     alaDhcpIsfDropCount OBJECT-TYPE
     SYNTAX Integer32
     MAX-ACCESS  accessible-for-notify
     STATUS  current
     DESCRIPTION
                "This object specifies the number of ISF drop in the time
                 period specified by alaDhcpIsfDropIntervalStartTimeStamp
                 and alaDhcpIsfDropIntervalStopTimeStamp."
     ::= { alaDhcpClientTrapsObj 5 }     
     
     alaDhcpTcamFailMsg OBJECT-TYPE
     SYNTAX OCTET STRING
     MAX-ACCESS  accessible-for-notify
     STATUS  current
     DESCRIPTION
                "This object specifies binding fail due to TCAM Resource."
     ::= { alaDhcpClientTrapsObj 6 }

--
-- COMPLIANCE
--


    alcatelIND1UDPRelayMIBCompliance MODULE-COMPLIANCE
    	STATUS	current
	DESCRIPTION
	    "Compliance statement for UDP Relay"
	MODULE
		MANDATORY-GROUPS
		{
		    iphelperGroup,
		    iphelperStatGroup,
		    iphelperMiscGroup,
          alaDhcpClientTrapsGroup,
		    iphelperSourceGroup,
		    iphelperOption82FormatASCIIConfigurableGroup,
		    alaDhcpClientTrapObjectsGroup,
		    iphelperxGroup		
		}

	    ::={ alcatelIND1UDPRelayMIBCompliances 1}


   iphelperGroup  OBJECT-GROUP
     	OBJECTS
	{
	   iphelperForwAddr,
	   iphelperStatus,
           iphelperAgentInformation,
           iphelperAgentInformationPolicy,
           iphelperDhcpOption82FormatType,
           iphelperDhcpOption82StringValue,
	   iphelperOption82Policy,
           iphelperPXESupport,
	   iphelperService,
           iphelperTrafficSuppressionStatus,
	   iphelperVlan,
       iphelperDhcpSnoopingTrapStatus

	}
	STATUS current
	DESCRIPTION
	     " Collection of objects for the management of parameters of UDP Relay."
	::= {  alcatelIND1UDPRelayMIBGroups 1}


    iphelperStatGroup  OBJECT-GROUP
     	OBJECTS
	{
	    iphelperServerAddress,
	    iphelperRxFromClient,
            iphelperTxToServer,
            iphelperMaxHopsViolation,
            iphelperForwDelayViolation,
            iphelperResetAll,
	    iphelperAgentInfoViolation,
	    iphelperInvalidGatewayIP,
	    iphelperInvalidAgentInfoOptFrmSrver
	}
	STATUS current
	DESCRIPTION
	     " Collection of objects for management of statistics for UDP Relay."
	::= {  alcatelIND1UDPRelayMIBGroups 2}


     iphelperMiscGroup   OBJECT-GROUP
     	OBJECTS
	{
	      iphelperForwDelay,
	      iphelperMaxHops,
	      iphelperForwardOption,
	      iphelperBootupOption,
	      iphelperBootupPacketOption,

              iphelperDhcpSnoopingOption82FormatASCIIField1,
              iphelperDhcpSnoopingOption82FormatASCIIField1StringValue,
              iphelperDhcpSnoopingOption82FormatASCIIField2,
              iphelperDhcpSnoopingOption82FormatASCIIField2StringValue,
              iphelperDhcpSnoopingOption82FormatASCIIField3,
              iphelperDhcpSnoopingOption82FormatASCIIField3StringValue,
              iphelperDhcpSnoopingOption82FormatASCIIField4,
              iphelperDhcpSnoopingOption82FormatASCIIField4StringValue,
              iphelperDhcpSnoopingOption82FormatASCIIField5,
              iphelperDhcpSnoopingOption82FormatASCIIField5StringValue,
              iphelperDhcpSnoopingOption82FormatASCIIDelimiter,

	      iphelperDhcpSnooping,
	      iphelperDhcpSnoopingOpt82DataInsertionStatus,
	      iphelperDhcpSnoopingMacAddrVerificationStatus,
	      iphelperDhcpSnoopingTrafficSuppressionStatus,
	      iphelperDhcpSnoopingBindingStatus,
	      iphelperDhcpSnoopingBindingDatabaseSyncTimeout,
	      iphelperDhcpSnoopingBindingDatabaseLastSyncTime,
	      iphelperDhcpSnoopingBindingDatabaseAction,
	      iphelperDhcpSnoopingBypassOpt82CheckStatus,
	      iphelperDhcpSnoopingBindingPersistencyStatus,
          alaMdnsGreTunnelName,
          alaMdnsAdminStatus,
          alaMdnsFloodVlans,
iphelperDhcpSnoopingArpAllowStatus
	}
	STATUS current
	DESCRIPTION
	        " Other independent objects of UDP Relay."
	::= {  alcatelIND1UDPRelayMIBGroups 3}


        alaDhcpClientTrapsGroup NOTIFICATION-GROUP
        NOTIFICATIONS
        {
             alaDhcpClientAddressAddTrap,
             alaDhcpClientAddressExpiryTrap,
             alaDhcpClientAddressModifyTrap,
       	     alaDhcpBindingDuplicateEntry,
             alaDhcpBindingTcamFail,
             alaDhcpIsfDrop
        }
        STATUS current
        DESCRIPTION
               "Collection of traps for management of DHCP Client "
        ::= {  alcatelIND1UDPRelayMIBGroups 4}

	iphelperSourceGroup OBJECT-GROUP
        OBJECTS
        {
             iphelperDhcpSourceFilterVlanFilteringStatus
        }
        STATUS current
        DESCRIPTION
                " Source filtering status at vlan level "
        ::= {  alcatelIND1UDPRelayMIBGroups 5}

	iphelperOption82FormatASCIIConfigurableGroup OBJECT-GROUP
        OBJECTS
        {
		iphelperDhcpSnoopingOption82FormatASCIIConfigurableField1,
		iphelperDhcpSnoopingOption82FormatASCIIConfigurableField1StrVal,
		iphelperDhcpSnoopingOption82FormatASCIIConfigurableField2,
		iphelperDhcpSnoopingOption82FormatASCIIConfigurableField2StrVal,
		iphelperDhcpSnoopingOption82FormatASCIIConfigurableField3,
		iphelperDhcpSnoopingOption82FormatASCIIConfigurableField3StrVal,
		iphelperDhcpSnoopingOption82FormatASCIIConfigurableField4,
		iphelperDhcpSnoopingOption82FormatASCIIConfigurableField4StrVal,
		iphelperDhcpSnoopingOption82FormatASCIIConfigurableField5,
		iphelperDhcpSnoopingOption82FormatASCIIConfigurableField5StrVal,
		iphelperDhcpSnoopingOption82FormatASCIIConfigurableDelimiter,
		iphelperDhcpSnoopingOption82FormatASCIIConfigurableStatus
	}
	STATUS current
	DESCRIPTION
	    "Collection of objects identifying option-32 for Circuit ID and Remote ID."
	::= {  alcatelIND1UDPRelayMIBGroups 6 }

	alaDhcpClientTrapObjectsGroup OBJECT-GROUP
	 OBJECTS
	{
	alaDhcpClientAddress,
	alaDhcpClientNewAddress,
    alaDhcpIsfDropIntervalStartTimeStamp,
    alaDhcpIsfDropIntervalStopTimeStamp,
    alaDhcpIsfDropCount,
    alaDhcpTcamFailMsg
	}
	STATUS  current
	DESCRIPTION
	    "Objects used in UDP Relay Notifications"
	::= {  alcatelIND1UDPRelayMIBGroups 7}
	
	iphelperxGroup OBJECT-GROUP
	 OBJECTS
	{
		iphelperxPortServiceAssociationName,
		iphelperxPortServiceAssociationPort,
		iphelperxPortServiceAssociationService,
		iphelperxPortServiceAssociationStatus,
		iphelperxServicePortAssociationName,
		iphelperxServicePortAssociationPort,
		iphelperxServicePortAssociationService,
		iphelperxServicePortAssociationStatus,
		iphelperxStatReset,
		iphelperxStatRxFromClient,
		iphelperxStatServerAddress,
		iphelperxStatService,
		iphelperxStatTxToServer,
		iphelperxStatVlan,
		iphelperxPropertiesName,
		iphelperxPropertiesPort,
		iphelperxPropertiesService
		 
	}
	STATUS  current
	DESCRIPTION
	    "An entry in UDP Relay PortAssociation table"
	::= {  alcatelIND1UDPRelayMIBGroups 8}
        ipv6helperGroup  OBJECT-GROUP
        OBJECTS
        {
           ipv6helperForwAddr,
           ipv6helperStatus,
           ipv6helperVlan
        }
        STATUS current
        DESCRIPTION
             " Collection of objects for the management of parameters of DHCPV6 Relay."
        ::= {  alcatelIND1UDPRelayMIBGroups 9}
        ipv6helperMiscGroup   OBJECT-GROUP
        OBJECTS
        {
           ipv6helperStatus,
           ipv6helperMaxHops,
           ipv6helperForwardOption,
           ipv6helperDhcpSnooping,
           ipv6helperDhcpSnoopingBindingStatus,
           ipv6helperDhcpSnoopingBindingDatabaseSyncTimeout,
           ipv6helperDhcpSnoopingBindingDatabaseLastSyncTime,
           ipv6helperDhcpSnoopingBindingDatabaseAction,
           ipv6helperDhcpSnoopingBindingPersistencyStatus,
           ipv6helperDhcpSnoopingVlanNumber,
           ipv6helperDhcpSnoopingVlanStatus,
           ipv6helperDhcpSnoopingPortIfIndex,
           ipv6helperDhcpSnoopingPortTrustMode,
           ipv6helperSnoopingClientViolation,
           ipv6helperSnoopingServerViolation,
           ipv6helperSnoopingBindingViolation,
           ipv6helperSnoopingInterfaceidViolation,
		   ipv6helperSnoopingPortSourceFilterStatus,
           ipv6helperBindingLinkLocalAddress,
           ipv6helperBindingIfIndex,
           ipv6helperBindingGlobalIpv6Address,
           ipv6helperBindingVlan,
           ipv6helperBindingLeaseTime,
           ipv6helperBindingRowStatus,
           ipv6helperStatsServerAddress,
           ipv6helperStatsVlan,
           ipv6helperRxFromClient,
           ipv6helperTxToServer,
           ipv6helperMaxHopsViolation,
           ipv6helperResetAll,
           ipv6helperInterfaceIdPrefixValue,
           ipv6helperRemoteIdFormatType,
           ipv6helperRemoteIdEnterpriseNumber,
           ipv6helperRemoteIdUserStringValue
        }
        STATUS current
        DESCRIPTION
                " Other independent objects of DHCPV6 Relay."
        ::= {  alcatelIND1UDPRelayMIBGroups 10}
		
		ipv6helperSourceFilterGroup	  OBJECT-GROUP
        OBJECTS
        {
             ipv6helperSourceFilterVlanStatus
        }
        STATUS current
        DESCRIPTION
                " IPV6 Source filtering status at vlan level "
        ::= {  alcatelIND1UDPRelayMIBGroups 11}
   END

