sepa_aggregation.c

Go to the documentation of this file.

/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
/*                                                                           */
/*                  This file is part of the program and library             */
/*         SCIP --- Solving Constraint Integer Programs                      */
/*                                                                           */
/*  Copyright (c) 2002-2026 Zuse Institute Berlin (ZIB)                      */
/*                                                                           */
/*  Licensed under the Apache License, Version 2.0 (the "License");          */
/*  you may not use this file except in compliance with the License.         */
/*  You may obtain a copy of the License at                                  */
/*                                                                           */
/*      http://www.apache.org/licenses/LICENSE-2.0                           */
/*                                                                           */
/*  Unless required by applicable law or agreed to in writing, software      */
/*  distributed under the License is distributed on an "AS IS" BASIS,        */
/*  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. */
/*  See the License for the specific language governing permissions and      */
/*  limitations under the License.                                           */
/*                                                                           */
/*  You should have received a copy of the Apache-2.0 license                */
/*  along with SCIP; see the file LICENSE. If not visit scipopt.org.         */
/*                                                                           */
/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
/**@file   sepa_aggregation.c
 * @ingroup DEFPLUGINS_SEPA
 * @brief  flow cover and complemented mixed integer rounding cuts separator (Marchand's version)
 * @author Leona Gottwald
 * @author Kati Wolter
 * @author Tobias Achterberg
 *
 * For an overview see:
 *
 * Marchand, H., & Wolsey, L. A. (2001).@n
 * Aggregation and mixed integer rounding to solve MIPs.@n
 * Operations research, 49(3), 363-371.
 *
 * Some remarks:
 * - In general, continuous variables are less prefered than integer variables, since their cut
 *   coefficient is worse.
 * - We seek for aggregations that project out continuous variables that are far away from their bound,
 *   since if it is at its bound then it doesn't contribute to the violation
 * - These aggregations are also useful for the flowcover separation, so after building an aggregation
 *   we try to generate a MIR cut and a flowcover cut.
 * - We only keep the best cut.
 */
 
/*---+----1----+----2----+----3----+----4----+----5----+----6----+----7----+----8----+----9----+----0----+----1----+----2*/
 
#include "blockmemshell/memory.h"
#include "scip/cuts.h"
#include "scip/pub_lp.h"
#include "scip/pub_message.h"
#include "scip/pub_misc.h"
#include "scip/pub_misc_sort.h"
#include "scip/pub_sepa.h"
#include "scip/pub_var.h"
#include "scip/scip_branch.h"
#include "scip/scip_cut.h"
#include "scip/scip_general.h"
#include "scip/scip_lp.h"
#include "scip/scip_mem.h"
#include "scip/scip_message.h"
#include "scip/scip_numerics.h"
#include "scip/scip_param.h"
#include "scip/scip_prob.h"
#include "scip/scip_sepa.h"
#include "scip/scip_sol.h"
#include "scip/scip_solvingstats.h"
#include "scip/scip_tree.h"
#include "scip/scip_var.h"
#include "scip/sepa_aggregation.h"
#include <string.h>
 
 
#define SEPA_NAME              "aggregation"
#define SEPA_DESC              "aggregation heuristic for complemented mixed integer rounding cuts and flowcover cuts"
#define SEPA_PRIORITY             -3000
#define SEPA_FREQ                    10
#define SEPA_MAXBOUNDDIST           1.0
#define SEPA_USESSUBSCIP          FALSE /**< does the separator use a secondary SCIP instance? */
#define SEPA_DELAY                FALSE /**< should separation method be delayed, if other separators found cuts? */
 
#define DEFAULT_MAXROUNDS            -1 /**< maximal number of cmir separation rounds per node (-1: unlimited) */
#define DEFAULT_MAXROUNDSROOT        -1 /**< maximal number of cmir separation rounds in the root node (-1: unlimited) */
#define DEFAULT_MAXTRIES            200 /**< maximal number of rows to start aggregation with per separation round
                                         *   (-1: unlimited) */
#define DEFAULT_MAXTRIESROOT         -1 /**< maximal number of rows to start aggregation with per round in the root node
                                         *   (-1: unlimited) */
#define DEFAULT_MAXFAILS             20 /**< maximal number of consecutive unsuccessful aggregation tries (-1: unlimited) */
#define DEFAULT_MAXFAILSROOT        100 /**< maximal number of consecutive unsuccessful aggregation tries in the root node
                                         *   (-1: unlimited) */
#define DEFAULT_MAXAGGRS              3 /**< maximal number of aggregations for each row per separation round */
#define DEFAULT_MAXAGGRSROOT          6 /**< maximal number of aggregations for each row per round in the root node */
#define DEFAULT_MAXSEPACUTS         100 /**< maximal number of cmir cuts separated per separation round */
#define DEFAULT_MAXSEPACUTSROOT     500 /**< maximal number of cmir cuts separated per separation round in root node */
#define DEFAULT_MAXSLACK            0.0 /**< maximal slack of rows to be used in aggregation */
#define DEFAULT_MAXSLACKROOT        0.1 /**< maximal slack of rows to be used in aggregation in the root node */
#define DEFAULT_DENSITYSCORE       1e-4 /**< weight of row density in the aggregation scoring of the rows */
#define DEFAULT_SLACKSCORE         1e-3 /**< weight of slack in the aggregation scoring of the rows */
#define DEFAULT_MAXAGGDENSITY      0.20 /**< maximal density of aggregated row */
#define DEFAULT_MAXROWDENSITY      0.05 /**< maximal density of row to be used in aggregation */
#define DEFAULT_DENSITYOFFSET       100 /**< additional number of variables allowed in row on top of density */
#define DEFAULT_MAXROWFAC          1e+4 /**< maximal row aggregation factor */
#define DEFAULT_MAXTESTDELTA         -1 /**< maximal number of different deltas to try (-1: unlimited) */
#define DEFAULT_AGGRTOL            1e-2 /**< aggregation heuristic: we try to delete continuous variables from the current
                                         *   aggregation, whose distance to its tightest bound is >= L - DEFAULT_AGGRTOL,
                                         *   where L is the largest of the distances between a continuous variable's value
                                         *   and its tightest bound in the current aggregation */
#define DEFAULT_TRYNEGSCALING      TRUE /**< should negative values also be tested in scaling? */
#define DEFAULT_FIXINTEGRALRHS     TRUE /**< should an additional variable be complemented if f0 = 0? */
#define DEFAULT_DYNAMICCUTS        TRUE /**< should generated cuts be removed from the LP if they are no longer tight? */
 
#define BOUNDSWITCH                 0.5
#define POSTPROCESS                TRUE
#define VARTYPEUSEVBDS                2 /**< We allow variable bound substitution for variables with continuous vartype only.
                                         *   See cuts.c for more information. */
#define MINFRAC                    0.05
#define MAXFRAC                    0.999
#define MAKECONTINTEGRAL          FALSE
#define IMPLINTSARECONT
 
 
/*
 * Data structures
 */
 
/** separator data */
struct SCIP_SepaData
{
   SCIP_Real             maxslack;           /**< maximal slack of rows to be used in aggregation */
   SCIP_Real             maxslackroot;       /**< maximal slack of rows to be used in aggregation in the root node */
   SCIP_Real             densityscore;       /**< weight of row density in the aggregation scoring of the rows */
   SCIP_Real             slackscore;         /**< weight of slack in the aggregation scoring of the rows */
   SCIP_Real             maxaggdensity;      /**< maximal density of aggregated row */
   SCIP_Real             maxrowdensity;      /**< maximal density of row to be used in aggregation */
   SCIP_Real             maxrowfac;          /**< maximal row aggregation factor */
   SCIP_Real             aggrtol;            /**< tolerance for bound distance used in aggregation heuristic */
   int                   maxrounds;          /**< maximal number of cmir separation rounds per node (-1: unlimited) */
   int                   maxroundsroot;      /**< maximal number of cmir separation rounds in the root node (-1: unlimited) */
   int                   maxtries;           /**< maximal number of rows to start aggregation with per separation round
                                              *   (-1: unlimited) */
   int                   maxtriesroot;       /**< maximal number of rows to start aggregation with per round in the root node
                                              *   (-1: unlimited) */
   int                   maxfails;           /**< maximal number of consecutive unsuccessful aggregation tries
                                              *   (-1: unlimited) */
   int                   maxfailsroot;       /**< maximal number of consecutive unsuccessful aggregation tries in the root
                                              *   node (-1: unlimited) */
   int                   maxaggrs;           /**< maximal number of aggregations for each row per separation round */
   int                   maxaggrsroot;       /**< maximal number of aggregations for each row per round in the root node */
   int                   maxsepacuts;        /**< maximal number of cmir cuts separated per separation round */
   int                   maxsepacutsroot;    /**< maximal number of cmir cuts separated per separation round in root node */
   int                   densityoffset;      /**< additional number of variables allowed in row on top of density */
   int                   maxtestdelta;       /**< maximal number of different deltas to try (-1: unlimited) */
   SCIP_Bool             trynegscaling;      /**< should negative values also be tested in scaling? */
   SCIP_Bool             fixintegralrhs;     /**< should an additional variable be complemented if f0 = 0? */
   SCIP_Bool             dynamiccuts;        /**< should generated cuts be removed from the LP if they are no longer tight? */
   SCIP_Bool             sepflowcover;       /**< whether flowcover cuts should be separated in the current call */
   SCIP_Bool             sepknapsackcover;   /**< whether knapsack cover cuts should be separated in the current call */
   SCIP_Bool             sepcmir;            /**< whether cMIR cuts should be separated in the current call */
   SCIP_SEPA*            cmir;               /**< separator for adding cmir cuts */
   SCIP_SEPA*            flowcover;          /**< separator for adding flowcover cuts */
   SCIP_SEPA*            knapsackcover;      /**< separator for adding knapsack cover cuts */
};
 
/** data used for aggregation of row */
typedef
struct AggregationData {
   SCIP_Real*            bounddist;          /**< bound distance of continuous variables */
   int*                  bounddistinds;      /**< problem indices of the continUous variables corresponding to the bounddistance value */
   int                   nbounddistvars;     /**< number of continuous variables that are not at their bounds */
   SCIP_ROW**            aggrrows;           /**< array of rows suitable for substitution of continuous variable */
   SCIP_Real*            aggrrowscoef;       /**< coefficient of continuous variable in row that is suitable for substitution of that variable */
   int                   aggrrowssize;       /**< size of aggrrows array */
   int                   naggrrows;          /**< occupied positions in aggrrows array */
   int*                  aggrrowsstart;      /**< array with start positions of suitable rows for substitution for each
                                              *   continuous variable with non-zero bound distance */
   int*                  ngoodaggrrows;      /**< array with number of rows suitable for substitution that only contain
                                              *   one continuous variable that is not at it's bound */
   int*                  nbadvarsinrow;      /**< number of continuous variables that are not at their bounds for each row */
   SCIP_AGGRROW*         aggrrow;            /**< store aggregation row here so that it can be reused */
} AGGREGATIONDATA;
 
/*
 * Local methods
 */
 
/** adds given cut to LP if violated */
static
SCIP_RETCODE addCut(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL*             sol,                /**< the solution that should be separated, or NULL for LP solution */
   SCIP_SEPA*            sepa,               /**< separator */
   SCIP_Bool             makeintegral,       /**< should cut be scaled to integral coefficients if possible? */
   SCIP_Real*            cutcoefs,           /**< coefficients of active variables in cut */
   int*                  cutinds,            /**< problem indices of variables in cut */
   int                   cutnnz,             /**< number of non-zeros in cut */
   SCIP_Real             cutrhs,             /**< right hand side of cut */
   SCIP_Real             cutefficacy,        /**< efficacy of cut */
   SCIP_Bool             cutislocal,         /**< is the cut only locally valid? */
   SCIP_Bool             cutremovable,       /**< should the cut be removed from the LP due to aging or cleanup? */
   int                   cutrank,            /**< rank of the cut */
   const char*           cutclassname,       /**< name of cut class to use for row names */
   SCIP_Bool*            cutoff,             /**< whether a cutoff has been detected */
   int*                  ncuts,              /**< pointer to count the number of added cuts */
   SCIP_ROW**            thecut              /**< pointer to return cut if it was added */
   )
{
   assert(scip != NULL);
   assert(cutcoefs != NULL);
   assert(cutoff != NULL);
   assert(ncuts != NULL);
 
   *cutoff = FALSE;
 
   if( cutnnz > 0 && SCIPisEfficacious(scip, cutefficacy) )
   {
      SCIP_VAR** vars;
      int i;
      SCIP_ROW* cut;
      char cutname[SCIP_MAXSTRLEN];
      SCIP_Bool success;
 
      /* get active problem variables */
      vars = SCIPgetVars(scip);
 
      /* create cut name */
      (void) SCIPsnprintf(cutname, SCIP_MAXSTRLEN, "%s%" SCIP_LONGINT_FORMAT "_%d", cutclassname, SCIPgetNLPs(scip), *ncuts);
 
tryagain:
      SCIP_CALL( SCIPcreateEmptyRowSepa(scip, &cut, sepa, cutname, -SCIPinfinity(scip), cutrhs, cutislocal, FALSE, cutremovable) );
 
      SCIP_CALL( SCIPcacheRowExtensions(scip, cut) );
 
      for( i = 0; i < cutnnz; ++i )
      {
         SCIP_CALL( SCIPaddVarToRow(scip, cut, vars[cutinds[i]], cutcoefs[i]) );
      }
 
      /* set cut rank */
      SCIProwChgRank(cut, cutrank);
 
      SCIPdebugMsg(scip, " -> found potential %s cut <%s>: rhs=%f, eff=%f\n", cutclassname, cutname, cutrhs, cutefficacy);
      SCIPdebug( SCIP_CALL( SCIPprintRow(scip, cut, NULL) ) );
 
      /* if requested, try to scale the cut to integral values  but only if the scaling is small; otherwise keep the fractional cut */
      if( makeintegral && SCIPgetRowNumIntCols(scip, cut) == SCIProwGetNNonz(cut) )
      {
         SCIP_CALL( SCIPmakeRowIntegral(scip, cut, -SCIPepsilon(scip), SCIPsumepsilon(scip),
               1000LL, 1000.0, MAKECONTINTEGRAL, &success) );
 
         if( SCIPisInfinity(scip, SCIProwGetRhs(cut)) )
         {
            /* release the row */
            SCIP_CALL( SCIPreleaseRow(scip, &cut) );
 
            /* the scaling destroyed the cut, so try to add it again, but this time do not scale it */
            makeintegral = FALSE;
            goto tryagain;
         }
      }
      else
      {
         success = FALSE;
      }
 
      if( success && !SCIPisCutEfficacious(scip, sol, cut) )
      {
         SCIPdebugMsg(scip, " -> %s cut <%s> no longer efficacious: rhs=%f, eff=%f\n", cutclassname, cutname, cutrhs, cutefficacy);
         SCIPdebug( SCIP_CALL( SCIPprintRow(scip, cut, NULL) ) );
 
         SCIP_CALL( SCIPreleaseRow(scip, &cut) );
 
         /* the cut is not efficacious anymore due to the scaling, so do not add it */
         return SCIP_OKAY;
      }
 
      SCIPdebugMsg(scip, " -> found %s cut <%s>: rhs=%f, eff=%f, rank=%d, min=%f, max=%f (range=%g)\n",
         cutclassname, cutname, cutrhs, cutefficacy, SCIProwGetRank(cut),
         SCIPgetRowMinCoef(scip, cut), SCIPgetRowMaxCoef(scip, cut),
         SCIPgetRowMaxCoef(scip, cut)/SCIPgetRowMinCoef(scip, cut));
      SCIPdebug( SCIP_CALL( SCIPprintRow(scip, cut, NULL) ) );
 
      SCIP_CALL( SCIPflushRowExtensions(scip, cut) );
 
      if( SCIPisCutNew(scip, cut) )
      {
         (*ncuts)++;
 
         if( !cutislocal )
         {
            SCIP_CALL( SCIPaddPoolCut(scip, cut) );
         }
         else
         {
            SCIP_CALL( SCIPaddRow(scip, cut, FALSE, cutoff) );
         }
 
         *thecut = cut;
      }
      else
      {
         /* release the row */
         SCIP_CALL( SCIPreleaseRow(scip, &cut) );
      }
   }
 
   return SCIP_OKAY;
}
 
/** setup data for aggregating rows */
static
SCIP_RETCODE setupAggregationData(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SOL*             sol,                /**< solution to separate, NULL for LP solution */
   SCIP_Bool             allowlocal,         /**< should local cuts be allowed */
   AGGREGATIONDATA*      aggrdata            /**< pointer to aggregation data to setup */
   )
{
   SCIP_VAR** vars;
   int nvars;
   int nbinvars;
   int nintvars;
   int ncontvars;
   int firstcontvar;
   int nimplvars;
   SCIP_ROW** rows;
   int nrows;
   int i;
 
   SCIP_CALL( SCIPgetVarsData(scip, &vars, &nvars, &nbinvars, &nintvars, &nimplvars, &ncontvars) );
   SCIP_CALL( SCIPgetLPRowsData(scip, &rows, &nrows) );
 
   SCIP_CALL( SCIPallocBufferArray(scip, &aggrdata->bounddist, ncontvars + nimplvars) );
   SCIP_CALL( SCIPallocBufferArray(scip, &aggrdata->bounddistinds, ncontvars + nimplvars) );
   SCIP_CALL( SCIPallocBufferArray(scip, &aggrdata->ngoodaggrrows, ncontvars + nimplvars) );
   SCIP_CALL( SCIPallocBufferArray(scip, &aggrdata->aggrrowsstart, ncontvars + nimplvars + 1) );
   SCIP_CALL( SCIPallocBufferArray(scip, &aggrdata->nbadvarsinrow, nrows) );
   SCIP_CALL( SCIPaggrRowCreate(scip, &aggrdata->aggrrow) );
   assert( aggrdata->aggrrow != NULL );
   BMSclearMemoryArray(aggrdata->nbadvarsinrow, nrows);
 
   aggrdata->nbounddistvars = 0;
   aggrdata->aggrrows = NULL;
   aggrdata->aggrrowscoef = NULL;
   aggrdata->aggrrowssize = 0;
   aggrdata->naggrrows = 0;
 
   firstcontvar = nvars - ncontvars;
 
   for( i = nbinvars + nintvars; i < nvars; ++i )
   {
      SCIP_Real bounddist;
      SCIP_Real primsol;
      SCIP_Real distlb;
      SCIP_Real distub;
      SCIP_Real bestlb;
      SCIP_Real bestub;
      SCIP_Real bestvlb;
      SCIP_Real bestvub;
      int bestvlbidx;
      int bestvubidx;
 
      /* compute the bound distance of the variable */
      if( allowlocal )
      {
         bestlb = SCIPvarGetLbLocal(vars[i]);
         bestub = SCIPvarGetUbLocal(vars[i]);
      }
      else
      {
         bestlb = SCIPvarGetLbGlobal(vars[i]);
         bestub = SCIPvarGetUbGlobal(vars[i]);
      }
 
      SCIP_CALL( SCIPgetVarClosestVlb(scip, vars[i], sol, &bestvlb, &bestvlbidx) );
      SCIP_CALL( SCIPgetVarClosestVub(scip, vars[i], sol, &bestvub, &bestvubidx) );
      if( bestvlbidx >= 0 )
         bestlb = MAX(bestlb, bestvlb);
      if( bestvubidx >= 0 )
         bestub = MIN(bestub, bestvub);
 
      primsol = SCIPgetSolVal(scip, sol, vars[i]);
      distlb = primsol - bestlb;
      distub = bestub - primsol;
 
      bounddist = MIN(distlb, distub);
      bounddist = MAX(bounddist, 0.0);
 
      /* prefer continuous variables over implicit integers to be aggregated out */
      if( i < firstcontvar )
         bounddist *= 0.1;
 
      /* when variable is not at its bound, we want to project it out, so add it to the aggregation data */
      if( !SCIPisZero(scip, bounddist) )
      {
         int k = aggrdata->nbounddistvars++;
 
         aggrdata->bounddist[k] = bounddist;
         aggrdata->bounddistinds[k] = i;
         aggrdata->aggrrowsstart[k] = aggrdata->naggrrows;
 
         /* the current variable is a bad variable (continuous, not at its bound): increase the number of bad variable
          * count on each row this variables appears in; also each of these rows can be used to project the variable out
          * so store them.
          */
         if( SCIPvarIsInLP(vars[i]) )
         {
            SCIP_COL* col = SCIPvarGetCol(vars[i]);
            SCIP_ROW** colrows = SCIPcolGetRows(col);
            SCIP_Real* colrowvals = SCIPcolGetVals(col);
            int ncolnonzeros = SCIPcolGetNLPNonz(col);
            int aggrrowsminsize = aggrdata->naggrrows + ncolnonzeros;
 
            if( aggrrowsminsize > aggrdata->aggrrowssize )
            {
               SCIP_CALL( SCIPreallocBufferArray(scip, &aggrdata->aggrrows, aggrrowsminsize) );
               SCIP_CALL( SCIPreallocBufferArray(scip, &aggrdata->aggrrowscoef, aggrrowsminsize) );
               aggrdata->aggrrowssize = aggrrowsminsize;
            }
            assert(aggrdata->aggrrows != NULL || aggrdata->aggrrowssize == 0);
            assert(aggrdata->aggrrowscoef != NULL || aggrdata->aggrrowssize == 0);
            assert(aggrdata->aggrrowssize > 0 || ncolnonzeros == 0);
 
            for( k = 0; k < ncolnonzeros; ++k )
            {
               /* ignore modifiable rows and local rows if those are not permitted */
               if( SCIProwIsModifiable(colrows[k]) || (!allowlocal && SCIProwIsLocal(colrows[k])) )
                  continue;
 
               ++aggrdata->nbadvarsinrow[SCIProwGetLPPos(colrows[k])];
               assert(aggrdata->aggrrows != NULL);  /* for lint */
               assert(aggrdata->aggrrowscoef != NULL);
               /* coverity[var_deref_op] */
               aggrdata->aggrrows[aggrdata->naggrrows] = colrows[k];
               aggrdata->aggrrowscoef[aggrdata->naggrrows] = colrowvals[k];
               ++aggrdata->naggrrows;
            }
         }
      }
   }
 
   /* add sentinel entry at the end */
   aggrdata->aggrrowsstart[aggrdata->nbounddistvars] = aggrdata->naggrrows;
 
   /* for each continous variable that is not at its bounds check if there is a
    * row where it is the only such variable ("good" rows). In the array with the rows that are
    * suitable for substituting this variable move the good rows to the beginning
    * and store the number of good rows for each of the variables.
    * If a variable has at least one good row, then it is a "better" variable and we make
    * the value of the bounddistance for this variable negative, to mark it.
    * Note that better variables are continous variables that are not at their bounds
    * and can be projected out without introducing bad variables (by using a good row).
    */
   {
      int beg;
 
      beg = aggrdata->aggrrowsstart[0];
      for( i = 0; i < aggrdata->nbounddistvars; ++i )
      {
         int k;
         int ngoodrows;
         int end;
 
         end = aggrdata->aggrrowsstart[i + 1];
         ngoodrows = 0;
         for( k = beg; k < end; ++k )
         {
            /* coverity[var_deref_op] */
            int lppos = SCIProwGetLPPos(aggrdata->aggrrows[k]);
 
            if( aggrdata->nbadvarsinrow[lppos] == 1 &&
                SCIPisEQ(scip, SCIProwGetLhs(aggrdata->aggrrows[k]), SCIProwGetRhs(aggrdata->aggrrows[k])) )
            {
               int nextgoodrowpos = beg + ngoodrows;
               if( k > nextgoodrowpos )
               {
                  SCIPswapPointers((void**) (&aggrdata->aggrrows[k]), (void**) (&aggrdata->aggrrows[nextgoodrowpos]));
                  SCIPswapReals(&aggrdata->aggrrowscoef[k], &aggrdata->aggrrowscoef[nextgoodrowpos]);
               }
               ++ngoodrows;
            }
         }
         if( ngoodrows > 0 )
         {
            aggrdata->bounddist[i] = -aggrdata->bounddist[i];
         }
         aggrdata->ngoodaggrrows[i] = ngoodrows;
         beg = end;
      }
   }
 
   return SCIP_OKAY;
}
 
/** free resources held in aggregation data */
static
void destroyAggregationData(
   SCIP*                 scip,               /**< SCIP datastructure */
   AGGREGATIONDATA*      aggrdata            /**< pointer to ggregation data */
   )
{
   SCIPaggrRowFree(scip, &aggrdata->aggrrow);
   SCIPfreeBufferArrayNull(scip, &aggrdata->aggrrowscoef);
   SCIPfreeBufferArrayNull(scip, &aggrdata->aggrrows);
   SCIPfreeBufferArray(scip, &aggrdata->nbadvarsinrow);
   SCIPfreeBufferArray(scip, &aggrdata->aggrrowsstart);
   SCIPfreeBufferArray(scip, &aggrdata->ngoodaggrrows);
   SCIPfreeBufferArray(scip, &aggrdata->bounddistinds);
   SCIPfreeBufferArray(scip, &aggrdata->bounddist);
}
 
/** retrieves the candidate rows for canceling out the given variable, also returns the number of "good" rows which are the
 *  rows stored at the first ngoodrows positions. A row is good if its continuous variables are all at their bounds, except
 *  maybe the given continuous variable (in probvaridx)
 */
static
SCIP_Bool getRowAggregationCandidates(
   AGGREGATIONDATA*      aggrdata,           /**< pointer to ggregation data */
   int                   probvaridx,         /**< problem index of variables to retrieve candidates for */
   SCIP_ROW***           rows,               /**< pointer to store array to candidate rows */
   SCIP_Real**           rowvarcoefs,        /**< pointer to store array of coefficients of given variable in the corresponding rows */
   int*                  nrows,              /**< pointer to return number of rows in returned arrays */
   int*                  ngoodrows           /**< pointer to return number of "good" rows in the returned arrays */
   )
{
   int aggrdataidx;
 
   if( !SCIPsortedvecFindInt(aggrdata->bounddistinds, probvaridx, aggrdata->nbounddistvars, &aggrdataidx) )
      return FALSE;
 
   *rows = aggrdata->aggrrows + aggrdata->aggrrowsstart[aggrdataidx];
   *nrows = aggrdata->aggrrowsstart[aggrdataidx + 1] - aggrdata->aggrrowsstart[aggrdataidx];
   *rowvarcoefs = aggrdata->aggrrowscoef + aggrdata->aggrrowsstart[aggrdataidx];
   *ngoodrows = aggrdata->ngoodaggrrows[aggrdataidx];
 
   return TRUE;
}
 
/** find the bound distance value in the aggregation data struct for the given variable problem index */
static
SCIP_Real aggrdataGetBoundDist(
   AGGREGATIONDATA*      aggrdata,           /**< SCIP datastructure */
   int                   probvaridx          /**< problem index of variables to retrieve candidates for */
   )
{
   int aggrdataidx;
 
   if( !SCIPsortedvecFindInt(aggrdata->bounddistinds, probvaridx, aggrdata->nbounddistvars, &aggrdataidx) )
      return 0.0;
 
   return aggrdata->bounddist[aggrdataidx];
}
 
/** Aggregates the next row suitable for cancelling out an active continuous variable.
 *
 *  Equality rows that contain no other active continuous variables are preffered and apart from that
 *  the scores for the rows are used to determine which row is aggregated next
 */
static
SCIP_RETCODE aggregateNextRow(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SEPADATA*        sepadata,           /**< separator data */
   SCIP_Real*            rowlhsscores,       /**< aggregation scores for left hand sides of row */
   SCIP_Real*            rowrhsscores,       /**< aggregation scores for right hand sides of row */
   AGGREGATIONDATA*      aggrdata,           /**< aggregation data */
   SCIP_AGGRROW*         aggrrow,            /**< current aggregation row */
   int*                  naggrs,             /**< pointer to increase counter if real aggregation took place */
   SCIP_Bool*            success             /**< pointer to return whether another row was added to the aggregation row */
   )
{
   int i;
   int firstcontvar;
   int* badvarinds;
   SCIP_Real* badvarbddist;
   int nbadvars;
   SCIP_Real minbddist;
   SCIP_ROW* bestrow;
   SCIP_Real bestrowscore;
   SCIP_Real aggrfac;
   int bestrowside;
   int ncontvars;
   int nnz = SCIPaggrRowGetNNz(aggrrow);
   int* inds = SCIPaggrRowGetInds(aggrrow);
 
   assert( success != NULL );
   *success = FALSE;
 
   firstcontvar = SCIPgetNBinVars(scip) + SCIPgetNIntVars(scip);
   ncontvars = SCIPgetNImplVars(scip) + SCIPgetNContVars(scip);
   assert( firstcontvar + ncontvars == SCIPgetNVars(scip) );
 
   SCIP_CALL( SCIPallocBufferArray(scip, &badvarinds, MIN(ncontvars, nnz)) );
   SCIP_CALL( SCIPallocBufferArray(scip, &badvarbddist, MIN(ncontvars, nnz)) );
 
   nbadvars = 0;
 
   for( i = 0; i < nnz; ++i )
   {
      SCIP_Real bounddist;
 
      /* only consider continuous variables */
      if( inds[i] < firstcontvar )
         continue;
 
      bounddist = aggrdataGetBoundDist(aggrdata, inds[i]);
 
      if( bounddist == 0.0 )
         continue;
 
      badvarinds[nbadvars] = inds[i];
      badvarbddist[nbadvars] = bounddist;
      ++nbadvars;
   }
 
   if( nbadvars == 0 )
      goto TERMINATE;
 
   SCIPsortDownRealInt(badvarbddist, badvarinds, nbadvars);
 
   aggrfac = 0.0;
   bestrowscore = 0.0;
   bestrowside = 0;
   minbddist = 0.0;
   bestrow = NULL;
 
   /* because the "good" bad variables have a negative bound distance, they are at the end */
   for( i = nbadvars - 1; i >= 0; --i )
   {
      int probvaridx;
      SCIP_ROW** candrows;
      SCIP_Real* candrowcoefs;
      int nrows;
      int ngoodrows;
      int k;
 
      /* if the bound distance is not negative, there are no more good variables so stop */
      if( badvarbddist[i] > 0.0 )
         break;
 
      /* if no best row was found yet, this variable has the currently best bound distance */
      if( aggrfac == 0.0 )
         minbddist = -badvarbddist[i] * (1.0 - sepadata->aggrtol);
 
      /* if the bound distance of the current variable is smaller than the minimum bound distance stop looping */
      if( -badvarbddist[i] < minbddist )
         break;
 
      probvaridx = badvarinds[i];
 
      if( !getRowAggregationCandidates(aggrdata, probvaridx, &candrows, &candrowcoefs, &nrows, &ngoodrows) )
         return SCIP_ERROR;
 
      assert(ngoodrows > 0); /* bounddistance was negative for this variable, so it should have good rows */
      assert(ngoodrows <= nrows);
 
      for( k = 0; k < ngoodrows; ++k )
      {
         SCIP_Real rowaggrfac;
         SCIP_Real rowscore;
         int lppos;
 
         /* do not add rows twice */
         if( SCIPaggrRowHasRowBeenAdded(aggrrow, candrows[k]) )
            continue;
 
         rowaggrfac = - SCIPaggrRowGetProbvarValue(aggrrow, probvaridx) / candrowcoefs[k];
 
         /* if factor is too extreme skip this row */
         if( SCIPisFeasZero(scip, rowaggrfac) || REALABS(rowaggrfac) > sepadata->maxrowfac )
            continue;
 
         lppos = SCIProwGetLPPos(candrows[k]);
 
         /* row could be used and good rows are equalities, so ignore sidetype */
         rowscore = MAX(rowlhsscores[lppos], rowrhsscores[lppos]);
 
         /* if this rows score is better than the currently best score, remember it */
         if( aggrfac == 0.0 || rowscore > bestrowscore )
         {
            bestrow = candrows[k];
            aggrfac = rowaggrfac;
            bestrowscore = rowscore;
            bestrowside = 0;
         }
      }
   }
 
   /* found a row among the good rows, so aggregate it and stop */
   if( aggrfac != 0.0 )
   {
      ++(*naggrs);
      SCIP_CALL( SCIPaggrRowAddRow(scip, aggrrow, bestrow, aggrfac, bestrowside) );
      SCIPaggrRowRemoveZeros(scip, aggrrow, FALSE, success);
      goto TERMINATE;
   }
 
   for( i = 0; i < nbadvars; ++i )
   {
      int probvaridx;
      SCIP_ROW** candrows;
      SCIP_Real* candrowcoefs;
      int nrows;
      int ngoodrows;
      int k;
 
      /* if the bound distance is negative, there are no more variables to be tested, so stop */
      if( badvarbddist[i] < 0.0 )
         break;
 
      /* if no best row was found yet, this variable has the currently best bound distance */
      if( aggrfac == 0.0 )
         minbddist = badvarbddist[i] * (1.0 - sepadata->aggrtol);
 
      /* if the bound distance of the current variable is smaller than the minimum bound distance stop looping */
      if( badvarbddist[i] < minbddist )
         break;
 
      probvaridx = badvarinds[i];
 
      if( !getRowAggregationCandidates(aggrdata, probvaridx, &candrows, &candrowcoefs, &nrows, &ngoodrows) )
         return SCIP_ERROR;
 
      /* bounddistance was positive for this variable, so it should not have good rows */
      assert(ngoodrows == 0);
 
      for( k = 0; k < nrows; ++k )
      {
         SCIP_Real rowaggrfac;
         SCIP_Real rowscore;
         int rowside;
         int lppos;
 
         /* do not add rows twice */
         if( SCIPaggrRowHasRowBeenAdded(aggrrow, candrows[k]) )
            continue;
 
         rowaggrfac = - SCIPaggrRowGetProbvarValue(aggrrow, probvaridx) / candrowcoefs[k];
 
         /* if factor is too extreme skip this row */
         if( SCIPisFeasZero(scip, rowaggrfac) || REALABS(rowaggrfac) > sepadata->maxrowfac )
            continue;
 
         /* row could be used, decide which side */
         lppos = SCIProwGetLPPos(candrows[k]);
 
         /* either both or none of the rowscores are 0.0 so use the one which gives a positive slack */
         if( (rowaggrfac < 0.0 && !SCIPisInfinity(scip, -SCIProwGetLhs(candrows[k]))) || SCIPisInfinity(scip, SCIProwGetRhs(candrows[k])) )
         {
            rowscore = rowlhsscores[lppos];
            rowside = -1;
         }
         else
         {
            rowscore = rowrhsscores[lppos];
            rowside = 1;
         }
 
         /* if this rows score is better than the currently best score, remember it */
         if( aggrfac == 0.0 || SCIPisGT(scip, rowscore, bestrowscore) ||
            (SCIPisEQ(scip, rowscore, bestrowscore) && aggrdata->nbadvarsinrow[lppos] < aggrdata->nbadvarsinrow[SCIProwGetLPPos(bestrow)]) )
         {
            bestrow = candrows[k];
            aggrfac = rowaggrfac;
            bestrowscore = rowscore;
            bestrowside = rowside;
         }
      }
   }
 
   /* found a row so aggregate it */
   if( aggrfac != 0.0 )
   {
      ++(*naggrs);
      SCIP_CALL( SCIPaggrRowAddRow(scip, aggrrow, bestrow, aggrfac, bestrowside) );
      SCIPaggrRowRemoveZeros(scip, aggrrow, FALSE, success);
   }
 
TERMINATE:
   SCIPfreeBufferArray(scip, &badvarbddist);
   SCIPfreeBufferArray(scip, &badvarinds);
 
   return SCIP_OKAY;
}
 
/** aggregates different single mixed integer constraints by taking linear combinations of the rows of the LP */
static
SCIP_RETCODE aggregation(
   SCIP*                 scip,               /**< SCIP data structure */
   AGGREGATIONDATA*      aggrdata,           /**< pointer to aggregation data */
   SCIP_SEPA*            sepa,               /**< separator */
   SCIP_SOL*             sol,                /**< the solution that should be separated, or NULL for LP solution */
   SCIP_Bool             allowlocal,         /**< should local cuts be allowed */
   SCIP_Real*            rowlhsscores,       /**< aggregation scores for left hand sides of row */
   SCIP_Real*            rowrhsscores,       /**< aggregation scores for right hand sides of row */
   int                   startrow,           /**< index of row to start aggregation; -1 for using the objective cutoff constraint */
   int                   maxaggrs,           /**< maximal number of aggregations */
   SCIP_Bool*            wastried,           /**< pointer to store whether the given startrow was actually tried */
   SCIP_Bool*            cutoff,             /**< whether a cutoff has been detected */
   int*                  cutinds,            /**< buffer array to store temporarily cut */
   SCIP_Real*            cutcoefs,           /**< buffer array to store temporarily cut */
   SCIP_Bool             negate,             /**< should the start row be multiplied by -1 */
   int*                  ncuts               /**< pointer to count the number of generated cuts */
   )
{
   SCIP_SEPADATA* sepadata;
   SCIP_ROW** rows;
 
   SCIP_Real startweight;
   SCIP_Real startrowact;
   int maxaggrnonzs;
   int naggrs;
   int nrows;
   int maxtestdelta;
 
   assert(scip != NULL);
   assert(aggrdata != NULL);
   assert(aggrdata->aggrrow != NULL);
   assert(sepa != NULL);
   assert(rowlhsscores != NULL);
   assert(rowrhsscores != NULL);
   assert(wastried != NULL);
   assert(cutoff != NULL);
   assert(ncuts != NULL);
 
   sepadata = SCIPsepaGetData(sepa);
   assert(sepadata != NULL);
 
   *cutoff = FALSE;
   *wastried = FALSE;
 
   SCIP_CALL( SCIPgetLPRowsData(scip, &rows, &nrows) );
   assert(nrows == 0 || rows != NULL);
 
   maxtestdelta = sepadata->maxtestdelta == -1 ? INT_MAX : sepadata->maxtestdelta;
 
   /* calculate maximal number of non-zeros in aggregated row */
   maxaggrnonzs = (int)(sepadata->maxaggdensity * SCIPgetNLPCols(scip)) + sepadata->densityoffset;
 
   /* add start row to the initially empty aggregation row (aggrrow) */
   if( startrow < 0 )
   {
      SCIP_Real rhs = SCIPgetCutoffbound(scip);
 
      /* if the objective is integral we round the right hand side of the cutoff constraint.
       * Therefore the constraint may not be valid for the problem but it is valid for the set
       * of all improving solutions. We refrain from adding an epsilon cutoff for the case
       * of a non-integral objective function to avoid cutting of any improving solution even
       * if the improvement is below some epsilon value.
       */
      if( SCIPisObjIntegral(scip) )
         rhs = floor(rhs);
 
      SCIP_CALL( SCIPaggrRowAddObjectiveFunction(scip, aggrdata->aggrrow, rhs, 1.0) );
 
      if( SCIPaggrRowGetNNz(aggrdata->aggrrow) == 0 )
      {
         SCIPaggrRowClear(aggrdata->aggrrow);
         return SCIP_OKAY;
      }
   }
   else
   {
      assert(0 <= startrow && startrow < nrows);
 
      SCIPdebugMsg(scip, "start c-MIR aggregation with row <%s> (%d/%d)\n", SCIProwGetName(rows[startrow]), startrow, nrows);
 
      startrowact = SCIPgetRowSolActivity(scip, rows[startrow], sol);
 
      if( startrowact <= 0.5 * SCIProwGetLhs(rows[startrow]) + 0.5 * SCIProwGetRhs(rows[startrow]) )
         startweight = -1.0;
      else
         startweight = 1.0;
 
      SCIP_CALL( SCIPaggrRowAddRow(scip, aggrdata->aggrrow, rows[startrow], negate ? -startweight : startweight, 0) ); /*lint !e644*/
   }
 
   /* try to generate cut from the current aggregated row; add cut if found, otherwise add another row to aggrrow
    * in order to get rid of a continuous variable
    */
   naggrs = 0;
   while( naggrs <= maxaggrs )
   {
      int cutrank = 0;
      int cutnnz = 0;
      SCIP_Bool aggrsuccess;
      SCIP_Bool cmirsuccess;
      SCIP_Bool cmircutislocal = FALSE;
      SCIP_Bool flowcoversuccess;
      SCIP_Real flowcoverefficacy;
      SCIP_Bool flowcovercutislocal = FALSE;
      SCIP_Bool knapsackcoversuccess;
      SCIP_Real knapsackcoverefficacy;
      SCIP_Bool knapsackcovercutislocal = FALSE;
      SCIP_ROW* cut = NULL;
      SCIP_Real cutrhs = SCIP_INVALID;
      SCIP_Real cutefficacy;
 
      *wastried = TRUE;
 
      /* Step 1:
       * try to generate a MIR cut out of the current aggregated row
       */
 
      flowcoverefficacy =  -SCIPinfinity(scip);
 
      if( sepadata->sepflowcover )
      {
         SCIP_CALL( SCIPcalcFlowCover(scip, sol, POSTPROCESS, BOUNDSWITCH, allowlocal, aggrdata->aggrrow, /*lint !e644*/
            cutcoefs, &cutrhs, cutinds, &cutnnz, &flowcoverefficacy, &cutrank, &flowcovercutislocal, &flowcoversuccess) );
      }
      else
      {
         flowcoversuccess = FALSE;
      }
 
      /* initialize the knapsack cover cut efficacy variable with the flowcover efficacy so that
       * only knapsack cover cuts better than that efficacy are returned.
       */
      knapsackcoverefficacy = flowcoverefficacy;
 
      if( sepadata->sepknapsackcover )
      {
         SCIP_CALL( SCIPcalcKnapsackCover(scip, sol, allowlocal, aggrdata->aggrrow, /*lint !e644*/
            cutcoefs, &cutrhs, cutinds, &cutnnz, &knapsackcoverefficacy, &cutrank, &knapsackcovercutislocal, &knapsackcoversuccess) );
      }
      else
      {
         knapsackcoversuccess = FALSE;
      }
 
      /* initialize the cutefficacy variable with the knapsackcoverefficacy, so that only CMIR cuts
       * that have a higher efficacy than that of a flowcover or knapsack cover cut possibly
       * found in the call above are returned since the previous cut is overwritten in that case.
       */
      cutefficacy = knapsackcoverefficacy;
 
      if( sepadata->sepcmir )
      {
         SCIP_CALL( SCIPcutGenerationHeuristicCMIR(scip, sol, POSTPROCESS, BOUNDSWITCH, VARTYPEUSEVBDS, allowlocal, maxtestdelta, NULL, NULL, MINFRAC, MAXFRAC,
            aggrdata->aggrrow, cutcoefs, &cutrhs, cutinds, &cutnnz, &cutefficacy, &cutrank, &cmircutislocal, &cmirsuccess) );
      }
      else
      {
         cmirsuccess = FALSE;
      }
 
      if( cmirsuccess )
      {
         SCIP_CALL( addCut(scip, sol, sepadata->cmir, FALSE, cutcoefs, cutinds, cutnnz, cutrhs, cutefficacy,
               cmircutislocal, sepadata->dynamiccuts, cutrank, startrow < 0 ? "objcmir" : "cmir", cutoff, ncuts, &cut) ); /*lint !e644*/
      }
      else if ( knapsackcoversuccess )
      {
         SCIP_CALL( addCut(scip, sol, sepadata->knapsackcover, FALSE, cutcoefs, cutinds, cutnnz, cutrhs, cutefficacy,
               knapsackcovercutislocal, sepadata->dynamiccuts, cutrank, startrow < 0 ? "objlci" : "lci", cutoff, ncuts, &cut) ); /*lint !e644*/
      }
      else if ( flowcoversuccess )
      {
         SCIP_CALL( addCut(scip, sol, sepadata->flowcover, FALSE, cutcoefs, cutinds, cutnnz, cutrhs, cutefficacy,
               flowcovercutislocal, sepadata->dynamiccuts, cutrank, startrow < 0 ? "objflowcover" : "flowcover", cutoff, ncuts, &cut) ); /*lint !e644*/
      }
 
      if ( *cutoff )
      {
         if( cut != NULL )
         {
            SCIP_CALL( SCIPreleaseRow(scip, &cut) );
         }
         break;
      }
 
      /* if the cut was successfully added, decrease the score of the rows used in the aggregation and clean the aggregation
       * row (and call this function again with a different start row for aggregation)
       */
      if( cut != NULL )
      {
         int* rowinds;
         int i;
 
         rowinds = SCIPaggrRowGetRowInds(aggrdata->aggrrow);
         nrows = SCIPaggrRowGetNRows(aggrdata->aggrrow);
 
         /* decrease row score of used rows slightly */
         for( i = 0; i < nrows; ++i )
         {
            SCIP_Real fac = 1.0 - 0.999 * SCIProwGetParallelism(rows[rowinds[i]], cut, 'e');
 
            rowlhsscores[rowinds[i]] *= fac;
            rowrhsscores[rowinds[i]] *= fac;
         }
 
         SCIP_CALL( SCIPreleaseRow(scip, &cut) );
 
         SCIPdebugMsg(scip, " -> abort aggregation: cut found\n");
         break;
      }
 
      /* Step 2:
       * aggregate an additional row in order to remove a continuous variable
       */
 
      /* abort, if we reached the maximal number of aggregations */
      if( naggrs == maxaggrs )
      {
         SCIPdebugMsg(scip, " -> abort aggregation: maximal number of aggregations reached\n");
         break;
      }
 
      SCIP_CALL( aggregateNextRow(scip, sepadata, rowlhsscores, rowrhsscores, aggrdata, aggrdata->aggrrow,
            &naggrs, &aggrsuccess) );
 
      /* no suitable aggregation was found or number of non-zeros is now too large so abort */
      if( ! aggrsuccess || SCIPaggrRowGetNNz(aggrdata->aggrrow) > maxaggrnonzs || SCIPaggrRowGetNNz(aggrdata->aggrrow) == 0 )
      {
         break;
      }
 
      SCIPdebugMsg(scip, " ->  current aggregation has %d/%d nonzeros and consists of %d/%d rows\n",
          SCIPaggrRowGetNNz(aggrdata->aggrrow), maxaggrnonzs, naggrs, maxaggrs);
   }
 
   SCIPaggrRowClear(aggrdata->aggrrow);
 
   return SCIP_OKAY;
}
 
/** gives an estimate of how much the activity of this row is affected by fractionality in the current solution */
static
SCIP_Real getRowFracActivity(
   SCIP_ROW*             row,                /**< the LP row */
   SCIP_Real*            fractionalities     /**< array of fractionalities for each variable */
   )
{
   int nlpnonz;
   int i;
   SCIP_COL** cols;
   SCIP_Real* vals;
   SCIP_Real fracsum = 0.0;
 
   cols = SCIProwGetCols(row);
   vals = SCIProwGetVals(row);
   nlpnonz = SCIProwGetNLPNonz(row);
 
   for( i = 0; i < nlpnonz; ++i )
   {
      SCIP_VAR* var = SCIPcolGetVar(cols[i]);
      fracsum += REALABS(vals[i] * fractionalities[SCIPvarGetProbindex(var)]);
   }
 
   return fracsum;
}
 
/** searches for and adds c-MIR cuts that separate the given primal solution */
static
SCIP_RETCODE separateCuts(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SEPA*            sepa,               /**< the c-MIR separator */
   SCIP_SOL*             sol,                /**< the solution that should be separated, or NULL for LP solution */
   SCIP_Bool             allowlocal,         /**< should local cuts be allowed */
   int                   depth,              /**< current depth */
   SCIP_RESULT*          result              /**< pointer to store the result */
   )
{
   AGGREGATIONDATA aggrdata;
   SCIP_SEPADATA* sepadata;
   SCIP_VAR** vars;
   SCIP_Real* varsolvals;
   SCIP_Real* bestcontlbs;
   SCIP_Real* bestcontubs;
   SCIP_Real* fractionalities;
   SCIP_ROW** rows;
   SCIP_Real* rowlhsscores;
   SCIP_Real* rowrhsscores;
   SCIP_Real* rowscores;
   int* roworder;
   SCIP_Real maxslack;
   SCIP_Bool cutoff = FALSE;
   SCIP_Bool wastried;
   int nvars;
   int nintvars;
   int ncontvars;
   int nrows;
   int nnonzrows;
   int ntries;
   int nfails;
   int ncalls;
   int maxtries;
   int maxfails;
   int maxaggrs;
   int maxsepacuts;
   int ncuts;
   int r;
   int v;
   int oldncuts;
 
   int* cutinds;
   SCIP_Real* cutcoefs;
 
   assert(result != NULL);
   assert(*result == SCIP_DIDNOTRUN);
 
   sepadata = SCIPsepaGetData(sepa);
   assert(sepadata != NULL);
 
   ncalls = SCIPsepaGetNCallsAtNode(sepa);
 
   /* only call the cmir cut separator a given number of times at each node */
   if( (depth == 0 && sepadata->maxroundsroot >= 0 && ncalls >= sepadata->maxroundsroot)
      || (depth > 0 && sepadata->maxrounds >= 0 && ncalls >= sepadata->maxrounds) )
      return SCIP_OKAY;
 
   /* check which cuts should be separated */
   {
      int cmirfreq;
      int flowcoverfreq;
      int knapsackcoverfreq;
 
      cmirfreq = SCIPsepaGetFreq(sepadata->cmir);
      flowcoverfreq = SCIPsepaGetFreq(sepadata->flowcover);
      knapsackcoverfreq = SCIPsepaGetFreq(sepadata->knapsackcover);
 
      sepadata->sepcmir = cmirfreq > 0 ? (depth % cmirfreq) == 0 : cmirfreq == depth;
      sepadata->sepflowcover = flowcoverfreq > 0 ? (depth % flowcoverfreq) == 0 : flowcoverfreq == depth;
      sepadata->sepknapsackcover = knapsackcoverfreq > 0 ? (depth % knapsackcoverfreq) == 0 : knapsackcoverfreq == depth;
   }
 
   if( ! sepadata->sepcmir && ! sepadata->sepflowcover && ! sepadata->sepknapsackcover )
      return SCIP_OKAY;
 
   /* get all rows and number of columns */
   SCIP_CALL( SCIPgetLPRowsData(scip, &rows, &nrows) );
   assert(nrows == 0 || rows != NULL);
 
   /* nothing to do, if LP is empty */
   if( nrows == 0 )
      return SCIP_OKAY;
 
   /* check whether SCIP was stopped in the meantime */
   if( SCIPisStopped(scip) )
      return SCIP_OKAY;
 
   /* get active problem variables */
   vars = SCIPgetVars(scip);
   nvars = SCIPgetNVars(scip);
   ncontvars = SCIPgetNContVars(scip);
#ifdef IMPLINTSARECONT
   ncontvars += SCIPgetNContImplVars(scip); /* also aggregate out implicit integers */
#endif
   nintvars = nvars - ncontvars;
   assert(nvars == 0 || vars != NULL);
 
   /* nothing to do, if problem has no variables */
   if( nvars == 0 )
      return SCIP_OKAY;
 
   SCIPdebugMsg(scip, "separating c-MIR cuts\n");
 
   *result = SCIP_DIDNOTFIND;
 
   /* get data structure */
   SCIP_CALL( SCIPallocBufferArray(scip, &rowlhsscores, nrows) );
   SCIP_CALL( SCIPallocBufferArray(scip, &rowrhsscores, nrows) );
   SCIP_CALL( SCIPallocBufferArray(scip, &roworder, nrows) );
   SCIP_CALL( SCIPallocBufferArray(scip, &varsolvals, nvars) );
   SCIP_CALL( SCIPallocBufferArray(scip, &bestcontlbs, ncontvars) );
   SCIP_CALL( SCIPallocBufferArray(scip, &bestcontubs, ncontvars) );
   SCIP_CALL( SCIPallocBufferArray(scip, &fractionalities, nvars) );
   SCIP_CALL( SCIPallocBufferArray(scip, &cutinds, nvars) );
   SCIP_CALL( SCIPallocBufferArray(scip, &cutcoefs, nvars) );
   SCIP_CALL( SCIPallocBufferArray(scip, &rowscores, nrows) );
 
   /* get the solution values for all active variables */
   SCIP_CALL( SCIPgetSolVals(scip, sol, nvars, vars, varsolvals) );
 
   /* calculate the fractionality of the integer variables in the current solution */
   for( v = 0; v < nintvars; ++v )
   {
      fractionalities[v] = SCIPfeasFrac(scip, varsolvals[v]);
      fractionalities[v] = MIN(fractionalities[v], 1.0 - fractionalities[v]);
   }
 
   /* calculate the fractionality of the continuous variables in the current solution;
    * The fractionality of a continuous variable x is defined to be a * f_y,
    * if there is a variable bound x <= a * y + c where f_y is the fractionality of y
    * and in the current solution the variable bound has no slack.
    */
   for( ; v < nvars; ++v )
   {
      SCIP_VAR** vlbvars;
      SCIP_VAR** vubvars;
      SCIP_Real* vlbcoefs;
      SCIP_Real* vubcoefs;
      SCIP_Real closestvlb;
      SCIP_Real closestvub;
      int closestvlbidx;
      int closestvubidx;
 
      SCIP_CALL( SCIPgetVarClosestVlb(scip, vars[v], sol, &closestvlb, &closestvlbidx) );
      SCIP_CALL( SCIPgetVarClosestVub(scip, vars[v], sol, &closestvub, &closestvubidx) );
 
      vlbvars = SCIPvarGetVlbVars(vars[v]);
      vubvars = SCIPvarGetVubVars(vars[v]);
      vlbcoefs = SCIPvarGetVlbCoefs(vars[v]);
      vubcoefs = SCIPvarGetVubCoefs(vars[v]);
 
      fractionalities[v] = 0.0;
      if( closestvlbidx != -1 && SCIPisEQ(scip, varsolvals[v], closestvlb) )
      {
         int vlbvarprobidx = SCIPvarGetProbindex(vlbvars[closestvlbidx]);
         SCIP_Real frac = SCIPfeasFrac(scip, varsolvals[vlbvarprobidx]);
 
         if( frac < 0.0 )
            frac = 0.0;
         assert(frac >= 0.0 && frac < 1.0);
         frac = MIN(frac, 1.0 - frac) * vlbcoefs[closestvlbidx];
         fractionalities[v] += frac;
      }
 
      if( closestvubidx != -1 && SCIPisEQ(scip, varsolvals[v], closestvub) )
      {
         int vubvarprobidx = SCIPvarGetProbindex(vubvars[closestvubidx]);
         SCIP_Real frac = SCIPfeasFrac(scip, varsolvals[vubvarprobidx]);
 
         if( frac < 0.0 )
            frac = 0.0;
         assert(frac >= 0.0 && frac < 1.0);
         frac = MIN(frac, 1.0 - frac) * vubcoefs[closestvubidx];
         fractionalities[v] += frac;
      }
   }
 
   /* get the maximal number of cuts allowed in a separation round */
   if( depth == 0 )
   {
      maxtries = sepadata->maxtriesroot;
      maxfails = sepadata->maxfailsroot;
      maxaggrs = sepadata->maxaggrsroot;
      maxsepacuts = sepadata->maxsepacutsroot;
      maxslack = sepadata->maxslackroot;
   }
   else
   {
      maxtries = sepadata->maxtries;
      maxfails = sepadata->maxfails;
      maxaggrs = sepadata->maxaggrs;
      maxsepacuts = sepadata->maxsepacuts;
      maxslack = sepadata->maxslack;
   }
 
   /* calculate aggregation scores for both sides of all rows, and sort rows by decreasing maximal score
    * TODO: document score definition */
 
   /* count the number of non-zero rows and zero rows. these values are used for the sorting of the rowscores.
    * only the non-zero rows need to be sorted. */
   nnonzrows = 0;
   for( r = 0; r < nrows; r++ )
   {
      int nnonz;
 
      assert(SCIProwGetLPPos(rows[r]) == r);
 
      nnonz = SCIProwGetNLPNonz(rows[r]);
      if( nnonz == 0 || SCIProwIsModifiable(rows[r]) || (!allowlocal && SCIProwIsLocal(rows[r])) )
      {
         /* ignore empty rows, modifiable rows, and local rows if they are not allowed */
         rowlhsscores[r] = 0.0;
         rowrhsscores[r] = 0.0;
      }
      else
      {
         SCIP_Real activity;
         SCIP_Real lhs;
         SCIP_Real rhs;
         SCIP_Real dualsol;
         SCIP_Real dualscore;
         SCIP_Real rowdensity;
         SCIP_Real rownorm;
         SCIP_Real slack;
         SCIP_Real fracact;
         SCIP_Real fracscore;
         SCIP_Real objnorm;
 
         objnorm = SCIPgetObjNorm(scip);
         objnorm = MAX(objnorm, 1.0);
 
         fracact = getRowFracActivity(rows[r], fractionalities);
         dualsol = (sol == NULL ? SCIProwGetDualsol(rows[r]) : 1.0);
         activity = SCIPgetRowSolActivity(scip, rows[r], sol);
         lhs = SCIProwGetLhs(rows[r]);
         rhs = SCIProwGetRhs(rows[r]);
         rownorm = SCIProwGetNorm(rows[r]);
         rownorm = MAX(rownorm, 0.1);
         rowdensity = (SCIP_Real)(nnonz - sepadata->densityoffset)/(SCIP_Real)nvars;
         assert(SCIPisPositive(scip, rownorm));
         fracscore = fracact / rownorm;
 
         slack = (activity - lhs)/rownorm;
         dualscore = MAX(fracscore * dualsol/objnorm, 0.0001);
         if( !SCIPisInfinity(scip, -lhs) && SCIPisLE(scip, slack, maxslack)
            && rowdensity <= sepadata->maxrowdensity
            && rowdensity <= sepadata->maxaggdensity )  /*lint !e774*/
         {
            rowlhsscores[r] = dualscore + sepadata->densityscore * (1.0-rowdensity) + sepadata->slackscore * MAX(1.0 - slack, 0.0);
            assert(rowlhsscores[r] > 0.0);
         }
         else
            rowlhsscores[r] = 0.0;
 
         slack = (rhs - activity)/rownorm;
         dualscore = MAX(-fracscore * dualsol/objnorm, 0.0001);
         if( !SCIPisInfinity(scip, rhs) && SCIPisLE(scip, slack, maxslack)
            && rowdensity <= sepadata->maxrowdensity
            && rowdensity <= sepadata->maxaggdensity )  /*lint !e774*/
         {
            rowrhsscores[r] = dualscore + sepadata->densityscore * (1.0-rowdensity) + sepadata->slackscore * MAX(1.0 - slack, 0.0);
            assert(rowrhsscores[r] > 0.0);
         }
         else
            rowrhsscores[r] = 0.0;
 
         /* for the row order only use the fractionality score since it best indicates how likely it is to find a cut */
         if( fracscore != 0.0 )
         {
            roworder[nnonzrows] = r;
            rowscores[nnonzrows] = fracscore;
            ++nnonzrows;
         }
      }
 
      SCIPdebugMsg(scip, " -> row %d <%s>: lhsscore=%g rhsscore=%g\n", r, SCIProwGetName(rows[r]),
         rowlhsscores[r], rowrhsscores[r]);
   }
   assert(nnonzrows <= nrows);
 
   SCIPsortDownRealInt(rowscores, roworder, nnonzrows);
   SCIPfreeBufferArray(scip, &rowscores);
 
   /* calculate the data required for performing the row aggregation */
   SCIP_CALL( setupAggregationData(scip, sol, allowlocal, &aggrdata) );
 
   ncuts = 0;
   if( maxtries < 0 )
      maxtries = INT_MAX;
   if( maxfails < 0 )
      maxfails = INT_MAX;
   else if( depth == 0 && 2 * SCIPgetNSepaRounds(scip) < maxfails )
      maxfails += maxfails - 2 * SCIPgetNSepaRounds(scip); /* allow up to double as many fails in early separounds of root node */
 
   /* start aggregation heuristic for each row in the LP and generate resulting cuts */
   ntries = 0;
   nfails = 0;
 
   if( !SCIPisInfinity(scip, SCIPgetCutoffbound(scip)) )
   {
      /* try separating the objective function with the cutoff bound */
      SCIP_CALL( aggregation(scip, &aggrdata, sepa, sol, allowlocal, rowlhsscores, rowrhsscores,
               -1, 2 * maxaggrs, &wastried, &cutoff, cutinds, cutcoefs, FALSE, &ncuts) );
 
      if( cutoff )
         goto TERMINATE;
   }
 
   for( r = 0; r < nnonzrows && ntries < maxtries && ncuts < maxsepacuts && !SCIPisStopped(scip); r++ )
   {
      oldncuts = ncuts;
      SCIP_CALL( aggregation(scip, &aggrdata, sepa, sol, allowlocal, rowlhsscores, rowrhsscores,
            roworder[r], maxaggrs, &wastried, &cutoff, cutinds, cutcoefs, FALSE, &ncuts) );
 
      /* if trynegscaling is true we start the aggregation heuristic again for this row, but multiply it by -1 first.
       * This is done by calling the aggregation function with the parameter negate equal to TRUE
       */
      if( sepadata->trynegscaling && !cutoff )
      {
         SCIP_CALL( aggregation(scip, &aggrdata, sepa, sol, allowlocal, rowlhsscores, rowrhsscores,
               roworder[r], maxaggrs, &wastried, &cutoff, cutinds, cutcoefs, TRUE, &ncuts) );
      }
 
      if ( cutoff )
         break;
 
      if( !wastried )
      {
         continue;
      }
      ntries++;
 
      if( ncuts == oldncuts )
      {
         nfails++;
         if( nfails >= maxfails )
         {
            break;
         }
      }
      else
      {
         nfails = 0;
      }
   }
 TERMINATE:
   /* free data structure */
   destroyAggregationData(scip, &aggrdata);
   SCIPfreeBufferArray(scip, &cutcoefs);
   SCIPfreeBufferArray(scip, &cutinds);
   SCIPfreeBufferArray(scip, &fractionalities);
   SCIPfreeBufferArray(scip, &bestcontubs);
   SCIPfreeBufferArray(scip, &bestcontlbs);
   SCIPfreeBufferArray(scip, &varsolvals);
   SCIPfreeBufferArray(scip, &roworder);
   SCIPfreeBufferArray(scip, &rowrhsscores);
   SCIPfreeBufferArray(scip, &rowlhsscores);
 
   if ( cutoff )
      *result = SCIP_CUTOFF;
   else if ( ncuts > 0 )
      *result = SCIP_SEPARATED;
 
   return SCIP_OKAY;
}
 
/*
 * Callback methods of separator
 */
 
/** copy method for separator plugins (called when SCIP copies plugins) */
static
SCIP_DECL_SEPACOPY(sepaCopyAggregation)
{  /*lint --e{715}*/
   assert(scip != NULL);
   assert(sepa != NULL);
   assert(strcmp(SCIPsepaGetName(sepa), SEPA_NAME) == 0);
 
   /* call inclusion method of constraint handler */
   SCIP_CALL( SCIPincludeSepaAggregation(scip) );
 
   return SCIP_OKAY;
}
 
/** destructor of separator to free user data (called when SCIP is exiting) */
static
SCIP_DECL_SEPAFREE(sepaFreeAggregation)
{  /*lint --e{715}*/
   SCIP_SEPADATA* sepadata;
 
   /* free separator data */
   sepadata = SCIPsepaGetData(sepa);
   assert(sepadata != NULL);
 
   SCIPfreeBlockMemory(scip, &sepadata);
 
   SCIPsepaSetData(sepa, NULL);
 
   return SCIP_OKAY;
}
 
/** LP solution separation method of separator */
static
SCIP_DECL_SEPAEXECLP(sepaExeclpAggregation)
{  /*lint --e{715}*/
   assert( result != NULL );
 
   *result = SCIP_DIDNOTRUN;
 
   /* only call separator, if we are not close to terminating */
   if( SCIPisStopped(scip) )
      return SCIP_OKAY;
 
   /* only call separator, if an optimal LP solution is at hand */
   if( SCIPgetLPSolstat(scip) != SCIP_LPSOLSTAT_OPTIMAL )
      return SCIP_OKAY;
 
   /* only call separator, if there are fractional variables */
   if( SCIPgetNLPBranchCands(scip) == 0 )
      return SCIP_OKAY;
 
   SCIP_CALL( separateCuts(scip, sepa, NULL, allowlocal, depth, result) );
 
   return SCIP_OKAY;
}
 
/** arbitrary primal solution separation method of separator */
static
SCIP_DECL_SEPAEXECSOL(sepaExecsolAggregation)
{  /*lint --e{715}*/
   assert( result != NULL );
 
   *result = SCIP_DIDNOTRUN;
 
   SCIP_CALL( separateCuts(scip, sepa, sol, allowlocal, depth, result) );
 
   return SCIP_OKAY;
}
 
/** LP solution separation method of dummy separator */
static
SCIP_DECL_SEPAEXECLP(sepaExeclpDummy)
{  /*lint --e{715}*/
   assert( result != NULL );
 
   *result = SCIP_DIDNOTRUN;
 
   return SCIP_OKAY;
}
 
/** arbitrary primal solution separation method of dummy separator */
static
SCIP_DECL_SEPAEXECSOL(sepaExecsolDummy)
{  /*lint --e{715}*/
   assert( result != NULL );
 
   *result = SCIP_DIDNOTRUN;
 
   return SCIP_OKAY;
}
 
/*
 * separator specific interface methods
 */
 
/** creates the cmir separator and includes it in SCIP */
SCIP_RETCODE SCIPincludeSepaAggregation(
   SCIP*                 scip                /**< SCIP data structure */
   )
{
   SCIP_SEPADATA* sepadata;
   SCIP_SEPA* sepa;
 
   /* create cmir separator data */
   SCIP_CALL( SCIPallocBlockMemory(scip, &sepadata) );
 
   /* include dummy separators */
   SCIP_CALL( SCIPincludeSepaBasic(scip, &sepadata->flowcover, "flowcover", "separator for flowcover cuts", -100000, SEPA_FREQ, 0.0,
      SEPA_USESSUBSCIP, FALSE, sepaExeclpDummy, sepaExecsolDummy, NULL) );
 
   assert(sepadata->flowcover != NULL);
 
   SCIP_CALL( SCIPincludeSepaBasic(scip, &sepadata->cmir, "cmir", "separator for cmir cuts", -100000, SEPA_FREQ, 0.0,
      SEPA_USESSUBSCIP, FALSE, sepaExeclpDummy, sepaExecsolDummy, NULL) );
 
   assert(sepadata->cmir != NULL);
 
    SCIP_CALL( SCIPincludeSepaBasic(scip, &sepadata->knapsackcover, "knapsackcover", "separator for knapsack cover cuts", -100000, SEPA_FREQ, 0.0,
      SEPA_USESSUBSCIP, FALSE, sepaExeclpDummy, sepaExecsolDummy, NULL) );
 
   assert(sepadata->knapsackcover != NULL);
 
   /* include separator */
   SCIP_CALL( SCIPincludeSepaBasic(scip, &sepa, SEPA_NAME, SEPA_DESC, SEPA_PRIORITY, SEPA_FREQ, SEPA_MAXBOUNDDIST,
         SEPA_USESSUBSCIP, SEPA_DELAY,
         sepaExeclpAggregation, sepaExecsolAggregation,
         sepadata) );
 
   assert(sepa != NULL);
 
   /* set non-NULL pointers to callback methods */
   SCIP_CALL( SCIPsetSepaCopy(scip, sepa, sepaCopyAggregation) );
   SCIP_CALL( SCIPsetSepaFree(scip, sepa, sepaFreeAggregation) );
 
   /* mark main separator as a parent */
   SCIPsetSepaIsParentsepa(scip, sepa);
 
   /* set pointer from child separators to main separator */
   SCIPsetSepaParentsepa(scip, sepadata->flowcover, sepa);
   SCIPsetSepaParentsepa(scip, sepadata->cmir, sepa);
   SCIPsetSepaParentsepa(scip, sepadata->knapsackcover, sepa);
 
   /* add cmir separator parameters */
   SCIP_CALL( SCIPaddIntParam(scip,
         "separating/" SEPA_NAME "/maxrounds",
         "maximal number of cmir separation rounds per node (-1: unlimited)",
         &sepadata->maxrounds, FALSE, DEFAULT_MAXROUNDS, -1, INT_MAX, NULL, NULL) );
   SCIP_CALL( SCIPaddIntParam(scip,
         "separating/" SEPA_NAME "/maxroundsroot",
         "maximal number of cmir separation rounds in the root node (-1: unlimited)",
         &sepadata->maxroundsroot, FALSE, DEFAULT_MAXROUNDSROOT, -1, INT_MAX, NULL, NULL) );
   SCIP_CALL( SCIPaddIntParam(scip,
         "separating/" SEPA_NAME "/maxtries",
         "maximal number of rows to start aggregation with per separation round (-1: unlimited)",
         &sepadata->maxtries, TRUE, DEFAULT_MAXTRIES, -1, INT_MAX, NULL, NULL) );
   SCIP_CALL( SCIPaddIntParam(scip,
         "separating/" SEPA_NAME "/maxtriesroot",
         "maximal number of rows to start aggregation with per separation round in the root node (-1: unlimited)",
         &sepadata->maxtriesroot, TRUE, DEFAULT_MAXTRIESROOT, -1, INT_MAX, NULL, NULL) );
   SCIP_CALL( SCIPaddIntParam(scip,
         "separating/" SEPA_NAME "/maxfails",
         "maximal number of consecutive unsuccessful aggregation tries (-1: unlimited)",
         &sepadata->maxfails, TRUE, DEFAULT_MAXFAILS, -1, INT_MAX, NULL, NULL) );
   SCIP_CALL( SCIPaddIntParam(scip,
         "separating/" SEPA_NAME "/maxfailsroot",
         "maximal number of consecutive unsuccessful aggregation tries in the root node (-1: unlimited)",
         &sepadata->maxfailsroot, TRUE, DEFAULT_MAXFAILSROOT, -1, INT_MAX, NULL, NULL) );
   SCIP_CALL( SCIPaddIntParam(scip,
         "separating/" SEPA_NAME "/maxaggrs",
         "maximal number of aggregations for each row per separation round",
         &sepadata->maxaggrs, TRUE, DEFAULT_MAXAGGRS, 0, INT_MAX, NULL, NULL) );
   SCIP_CALL( SCIPaddIntParam(scip,
         "separating/" SEPA_NAME "/maxaggrsroot",
         "maximal number of aggregations for each row per separation round in the root node",
         &sepadata->maxaggrsroot, TRUE, DEFAULT_MAXAGGRSROOT, 0, INT_MAX, NULL, NULL) );
   SCIP_CALL( SCIPaddIntParam(scip,
         "separating/" SEPA_NAME "/maxsepacuts",
         "maximal number of cmir cuts separated per separation round",
         &sepadata->maxsepacuts, FALSE, DEFAULT_MAXSEPACUTS, 0, INT_MAX, NULL, NULL) );
   SCIP_CALL( SCIPaddIntParam(scip,
         "separating/" SEPA_NAME "/maxsepacutsroot",
         "maximal number of cmir cuts separated per separation round in the root node",
         &sepadata->maxsepacutsroot, FALSE, DEFAULT_MAXSEPACUTSROOT, 0, INT_MAX, NULL, NULL) );
   SCIP_CALL( SCIPaddRealParam(scip,
         "separating/" SEPA_NAME "/maxslack",
         "maximal slack of rows to be used in aggregation",
         &sepadata->maxslack, TRUE, DEFAULT_MAXSLACK, 0.0, SCIP_REAL_MAX, NULL, NULL) );
   SCIP_CALL( SCIPaddRealParam(scip,
         "separating/" SEPA_NAME "/maxslackroot",
         "maximal slack of rows to be used in aggregation in the root node",
         &sepadata->maxslackroot, TRUE, DEFAULT_MAXSLACKROOT, 0.0, SCIP_REAL_MAX, NULL, NULL) );
   SCIP_CALL( SCIPaddRealParam(scip,
         "separating/" SEPA_NAME "/densityscore",
         "weight of row density in the aggregation scoring of the rows",
         &sepadata->densityscore, TRUE, DEFAULT_DENSITYSCORE, 0.0, SCIP_REAL_MAX, NULL, NULL) );
   SCIP_CALL( SCIPaddRealParam(scip,
         "separating/" SEPA_NAME "/slackscore",
         "weight of slack in the aggregation scoring of the rows",
         &sepadata->slackscore, TRUE, DEFAULT_SLACKSCORE, 0.0, SCIP_REAL_MAX, NULL, NULL) );
   SCIP_CALL( SCIPaddRealParam(scip,
         "separating/" SEPA_NAME "/maxaggdensity",
         "maximal density of aggregated row",
         &sepadata->maxaggdensity, TRUE, DEFAULT_MAXAGGDENSITY, 0.0, 1.0, NULL, NULL) );
   SCIP_CALL( SCIPaddRealParam(scip,
         "separating/" SEPA_NAME "/maxrowdensity",
         "maximal density of row to be used in aggregation",
         &sepadata->maxrowdensity, TRUE, DEFAULT_MAXROWDENSITY, 0.0, 1.0, NULL, NULL) );
   SCIP_CALL( SCIPaddIntParam(scip,
         "separating/" SEPA_NAME "/densityoffset",
         "additional number of variables allowed in row on top of density",
         &sepadata->densityoffset, TRUE, DEFAULT_DENSITYOFFSET, 0, INT_MAX, NULL, NULL) );
   SCIP_CALL( SCIPaddRealParam(scip,
         "separating/" SEPA_NAME "/maxrowfac",
         "maximal row aggregation factor",
         &sepadata->maxrowfac, TRUE, DEFAULT_MAXROWFAC, 0.0, SCIP_REAL_MAX, NULL, NULL) );
   SCIP_CALL( SCIPaddIntParam(scip,
         "separating/" SEPA_NAME "/maxtestdelta",
         "maximal number of different deltas to try (-1: unlimited)",
         &sepadata->maxtestdelta, TRUE, DEFAULT_MAXTESTDELTA, -1, INT_MAX, NULL, NULL) );
   SCIP_CALL( SCIPaddRealParam(scip,
         "separating/" SEPA_NAME "/aggrtol",
         "tolerance for bound distances used to select continuous variable in current aggregated constraint to be eliminated",
         &sepadata->aggrtol, TRUE, DEFAULT_AGGRTOL, 0.0, SCIP_REAL_MAX, NULL, NULL) );
   SCIP_CALL( SCIPaddBoolParam(scip,
         "separating/" SEPA_NAME "/trynegscaling",
         "should negative values also be tested in scaling?",
         &sepadata->trynegscaling, TRUE, DEFAULT_TRYNEGSCALING, NULL, NULL) );
   SCIP_CALL( SCIPaddBoolParam(scip,
         "separating/" SEPA_NAME "/fixintegralrhs",
         "should an additional variable be complemented if f0 = 0?",
         &sepadata->fixintegralrhs, TRUE, DEFAULT_FIXINTEGRALRHS, NULL, NULL) );
   SCIP_CALL( SCIPaddBoolParam(scip,
         "separating/" SEPA_NAME "/dynamiccuts",
         "should generated cuts be removed from the LP if they are no longer tight?",
         &sepadata->dynamiccuts, FALSE, DEFAULT_DYNAMICCUTS, NULL, NULL) );
 
   return SCIP_OKAY;
}